Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com> --- drivers/Makefile | 2 +- drivers/led/Kconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/Makefile b/drivers/Makefile index 1baecb4..3188a51 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += ddr/marvell/axp/ obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/ obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/ obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/ -obj-$(CONFIG_SPL_LED_SUPPORT) += led/ +obj-$(CONFIG_SPL_LED) += led/ obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/ obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/ obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/ diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig index de5feea..781c410 100644 --- a/drivers/led/Kconfig +++ b/drivers/led/Kconfig @@ -7,7 +7,7 @@ config LED can provide access to board-specific LEDs. Use of the device tree for configuration is encouraged. -config SPL_LED_SUPPORT +config SPL_LED bool "Enable LED support in SPL" depends on LED help -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot