Pass directly boot_addr which is LOVEC (0) or HIVEC (0xffff0000).
No reason to use magic values 0 and 1.
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---
arch/arm/cpu/armv8/zynqmp/mp.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/arch/arm/cpu/armv8/zynqmp/mp.c b/arch/arm/cpu/armv8/zynqmp/mp.c
index 17e32a7b7ce8..dcb80b522ead 100644
--- a/arch/arm/cpu/armv8/zynqmp/mp.c
+++ b/arch/arm/cpu/armv8/zynqmp/mp.c
@@ -216,12 +216,7 @@ int cpu_release(int nr, int argc, char * const argv[])
printf("R5 lockstep mode\n");
set_r5_tcm_mode(LOCK);
set_r5_halt_mode(HALT, LOCK);
-
- if (boot_addr == 0)
- set_r5_start(0);
- else
- set_r5_start(1);
-
+ set_r5_start(boot_addr);
enable_clock_r5();
release_r5_reset(LOCK);
set_r5_halt_mode(RELEASE, LOCK);
--
2.3.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
