Hi Steve,
> The OTG hardware is a DWC2 controller and this series uses the
> existing gadget driver ("s3c_udc_otg.c").
>
> Changes in v3:
> - use static inline functions instead of macros
> - update the delay (2ms) to match the kernel code
> - use "SZ_1M"
> - undefine the 8-bit phy interface
>
> Changes in v2:
> - rebased against u-boot-dfu
>
> Jiandong Zheng and Steve Rae (2):
> usb: gadget: bcm_udc_otg files
> implement Fastboot via USB OTG on bcm28155_ap boards
>
> Steve Rae (1):
> g_dnl: add missing declaration
>
> arch/arm/include/asm/arch-bcm281xx/sysmap.h | 7 ++++
> board/broadcom/bcm28155_ap/bcm28155_ap.c | 40
> ++++++++++++++++++++++ drivers/usb/gadget/Makefile |
> 1 + drivers/usb/gadget/bcm_udc_otg.h | 22 +++++++++++++
> drivers/usb/gadget/bcm_udc_otg_phy.c | 51
> +++++++++++++++++++++++++++++
> include/configs/bcm28155_ap.h | 20 +++++++++++
> include/g_dnl.h | 1 + 7 files changed,
> 142 insertions(+) create mode 100644 drivers/usb/gadget/bcm_udc_otg.h
> create mode 100644 drivers/usb/gadget/bcm_udc_otg_phy.c
>
Applied to u-boot-dfu (the whole series).
Thanks for patches!
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
