Pin muxing needs to be done before UART output, since on A38x the UART
pins need some re-muxing for output to work.
Signed-off-by: Stefan Roese <s...@denx.de>
---
Changes in v2: None
arch/arm/mach-mvebu/spl.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index 402e520..2df25aa 100644
--- a/arch/arm/mach-mvebu/spl.c
+++ b/arch/arm/mach-mvebu/spl.c
@@ -26,6 +26,13 @@ void board_init_f(ulong dummy)
/* Linux expects the internal registers to be at 0xf1000000 */
arch_cpu_init();
+ /*
+ * Pin muxing needs to be done before UART output, since
+ * on A38x the UART pins need some re-muxing for output
+ * to work.
+ */
+ board_early_init_f();
+
preloader_console_init();
/* First init the serdes PHY's */
--
2.4.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
