Dear rhabarber1848, In message <h3l0ci$lh...@ger.gmane.org> you wrote: > > it seems I solved the problem.
Hm... > The end value for the kernel was too high, the attached patch[1] should fix > it, a LZMA-compressed kernel booted well. I did not test the bz2 case but > it seems it suffers from the same bug. Maybe lzmaBuffToBuffDecompress() stores an incorrect value in unc_len? > diff -uNr u-boot-2009.06.org/common/cmd_bootm.c > u-boot-2009.06/common/cmd_bootm.c > --- u-boot-2009.06.org/common/cmd_bootm.c 2009-06-14 21:30:39.000000000 > +0200 > +++ u-boot-2009.06/common/cmd_bootm.c 2009-07-15 18:28:28.000000000 +0200 > @@ -380,7 +380,7 @@ > return BOOTM_ERR_RESET; > } > > - *load_end = load + unc_len; > + *load_end = load + image_len; > break; > #endif /* CONFIG_BZIP2 */ > #ifdef CONFIG_LZMA > @@ -396,7 +396,7 @@ > show_boot_progress (-6); > return BOOTM_ERR_RESET; > } > - *load_end = load + unc_len; > + *load_end = load + image_len; This seems definitely wrong to me. image_len is the length of the _compressed_ image, which is not what we need here. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "Wish not to seem, but to be, the best." - Aeschylus _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
