As SPL does not know which source to choose when booting U-Boot, choose
NAND if it is capable of doing so.
Signed-off-by: Peter Gielda <pgie...@antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorocho...@antmicro.com>
Signed-off-by: Mateusz Holenko <mhole...@antmicro.com>
Signed-off-by: Piotr Zierhoffer <pzierhof...@antmicro.com>
---
arch/arm/cpu/armv7/sunxi/board.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index 5f39aa0..e4b7d63 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -128,6 +128,9 @@ void s_init(void)
*/
u32 spl_boot_device(void)
{
+#ifdef CONFIG_SPL_NAND_SUPPORT
+ return BOOT_DEVICE_NAND;
+#else
/*
* When booting from the SD card, the "eGON.BT0" signature is expected
* to be found in memory at the address 0x0004 (see the "mksunxiboot"
@@ -148,6 +151,7 @@ u32 spl_boot_device(void)
return BOOT_DEVICE_MMC1;
else
return BOOT_DEVICE_BOARD;
+#endif
}
/* No confirmation data available in SPL yet. Hardcode bootmode */
--
2.3.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
