Hello,
On 07/03/2015 02:16 AM, Simon Glass wrote:
Enable PMICs, regulators and the like so that new drivers will be made
available.
Signed-off-by: Simon Glass <s...@chromium.org>
---
board/samsung/smdk5420/smdk5420.c | 2 +-
configs/arndale_defconfig | 2 ++
configs/odroid-xu3_defconfig | 5 +++++
configs/peach-pi_defconfig | 17 +++++++++++++++++
configs/peach-pit_defconfig | 17 +++++++++++++++++
configs/smdk5250_defconfig | 10 ++++++++++
configs/smdk5420_defconfig | 5 +++++
configs/snow_defconfig | 23 +++++++++++++++++++++++
include/configs/arndale.h | 4 ++++
include/configs/exynos5-common.h | 10 ++--------
include/configs/exynos5-dt-common.h | 5 -----
include/configs/smdk5250.h | 3 ---
include/configs/snow.h | 3 ---
13 files changed, 86 insertions(+), 20 deletions(-)
diff --git a/board/samsung/smdk5420/smdk5420.c
b/board/samsung/smdk5420/smdk5420.c
index 88f4044..57cc92c 100644
--- a/board/samsung/smdk5420/smdk5420.c
+++ b/board/samsung/smdk5420/smdk5420.c
@@ -50,9 +50,9 @@ static int has_edp_bridge(void)
void exynos_lcd_power_on(void)
{
+#ifdef CONFIG_POWER_TPS65090
int ret;
-#ifdef CONFIG_POWER_TPS65090
ret = tps65090_init();
if (ret < 0) {
printf("%s: tps65090_init() failed\n", __func__);
diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig
index 43f39f2..10e9d03 100644
--- a/configs/arndale_defconfig
+++ b/configs/arndale_defconfig
@@ -10,3 +10,5 @@ CONFIG_I2S=y
CONFIG_I2S_SAMSUNG=y
CONFIG_SOUND_MAX98095=y
CONFIG_SOUND_WM8994=y
+CONFIG_DM_I2C=y
+CONFIG_DM_I2C_COMPAT=y
diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig
index c9c4849..9760808 100644
--- a/configs/odroid-xu3_defconfig
+++ b/configs/odroid-xu3_defconfig
@@ -4,3 +4,8 @@ CONFIG_TARGET_ODROID_XU3=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_DEFAULT_DEVICE_TREE="exynos5422-odroidxu3"
CONFIG_CMD_NET=y
+CONFIG_DM_I2C=y
+CONFIG_DM_I2C_COMPAT=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
At present we don't have pmic/regulator driver for XU3, but probably
will have soon, so it can be enabled.
But there is no video bridge on XU3.
I assume that you enable this, because of using the single board file,
but should go this way?
Regards
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marc...@samsung.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
