The AX_ prefix comes from the Asix driver. Since this is not that, we should
avoid this confusing prefix.
Signed-off-by: Simon Glass <s...@chromium.org>
---
drivers/usb/eth/smsc95xx.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c
index 8ebe4d6..2d109fb 100644
--- a/drivers/usb/eth/smsc95xx.c
+++ b/drivers/usb/eth/smsc95xx.c
@@ -132,7 +132,7 @@
#define USB_BULK_SEND_TIMEOUT 5000
#define USB_BULK_RECV_TIMEOUT 5000
-#define AX_RX_URB_SIZE 2048
+#define RX_URB_SIZE 2048
#define PHY_CONNECT_TIMEOUT 5000
#define TURBO_MODE
@@ -712,7 +712,7 @@ static int smsc95xx_send(struct eth_device *eth, void*
packet, int length)
static int smsc95xx_recv(struct eth_device *eth)
{
struct ueth_data *dev = (struct ueth_data *)eth->priv;
- DEFINE_CACHE_ALIGN_BUFFER(unsigned char, recv_buf, AX_RX_URB_SIZE);
+ DEFINE_CACHE_ALIGN_BUFFER(unsigned char, recv_buf, RX_URB_SIZE);
unsigned char *buf_ptr;
int err;
int actual_len;
@@ -723,16 +723,16 @@ static int smsc95xx_recv(struct eth_device *eth)
err = usb_bulk_msg(dev->pusb_dev,
usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in),
(void *)recv_buf,
- AX_RX_URB_SIZE,
+ RX_URB_SIZE,
&actual_len,
USB_BULK_RECV_TIMEOUT);
- debug("Rx: len = %u, actual = %u, err = %d\n", AX_RX_URB_SIZE,
+ debug("Rx: len = %u, actual = %u, err = %d\n", RX_URB_SIZE,
actual_len, err);
if (err != 0) {
debug("Rx: failed to receive\n");
return -1;
}
- if (actual_len > AX_RX_URB_SIZE) {
+ if (actual_len > RX_URB_SIZE) {
debug("Rx: received too many bytes %d\n", actual_len);
return -1;
}
--
2.4.3.573.g4eafbef
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
