The OTG hardware is a DWC2 controller and this series uses the
existing gadget driver ("s3c_udc_otg.c").JD (Jiandong) Zheng and Steve Rae (2): usb: gadget: bcm_udc_otg files implement Fastboot via USB OTG on bcm28155_ap boards Steve Rae (2): g_dnl: add missing declaration usb: s3c-otg: support 8-bit interface arch/arm/include/asm/arch-bcm281xx/sysmap.h | 7 ++++ board/broadcom/bcm28155_ap/bcm28155_ap.c | 40 +++++++++++++++++++++++ drivers/usb/gadget/Makefile | 1 + drivers/usb/gadget/bcm_udc_otg.h | 17 ++++++++++ drivers/usb/gadget/bcm_udc_otg_phy.c | 50 +++++++++++++++++++++++++++++ drivers/usb/gadget/s3c_udc_otg.c | 4 +++ include/configs/bcm28155_ap.h | 20 ++++++++++++ include/g_dnl.h | 1 + 8 files changed, 140 insertions(+) create mode 100644 drivers/usb/gadget/bcm_udc_otg.h create mode 100644 drivers/usb/gadget/bcm_udc_otg_phy.c -- 1.8.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
