The driver supports driver model. Add a node for snow, which needs it.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/arm/dts/exynos5250-snow.dts | 36 ++++++++++++++++--------------------
1 file changed, 16 insertions(+), 20 deletions(-)
diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
index 3591252..334a5af 100644
--- a/arch/arm/dts/exynos5250-snow.dts
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -206,6 +206,22 @@
};
};
+ i2c@12CD0000 {
+ ptn3460: lvds-bridge@20 {
+ compatible = "nxp,ptn3460";
+ reg = <0x20>;
+ sleep-gpios = <&gpy2 5 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+ hotplug-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+ edid-emulation = <5>;
+ };
+
+ soundcodec@22 {
+ reg = <0x22>;
+ compatible = "maxim,max98095-codec";
+ };
+ };
+
spi@12d30000 {
spi-max-frequency = <50000000>;
firmware_storage_spi: flash@0 {
@@ -238,26 +254,6 @@
status = "disabled";
};
- i2c@12CD0000 {
- soundcodec@22 {
- reg = <0x22>;
- compatible = "maxim,max98095-codec";
- };
-
- ptn3460-bridge@20 {
- compatible = "nxp,ptn3460";
- reg = <0x20>;
- /*
- * TODO(s...@chromium.org): Use GPIOs here
- * powerdown-gpio = <&gpy2 5 0>;
- * reset-gpio = <&gpx1 5 0>;
- * edid-emulation = <5>;
- * pinctrl-names = "default";
- * pinctrl-0 = <&ptn3460_gpios>;
- */
- };
- };
-
i2c@12C60000 {
max77686@09 {
reg = <0x9>;
--
2.4.3.573.g4eafbef
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
