On Mon, Jun 15, 2015 at 08:32:21AM -0400, Vitaly Andrianov wrote: > This commit replaces hard-coded EMIF and PHY DDR3 configurations for > predefined SODIMMs to a calculated configuration. The SODIMM parameters > are read from SODIMM's SPD and used to calculated the configuration. > > The current commit supports calculation for DDR3 with 1600MHz and 1333MHz > only. > > Signed-off-by: Vitaly Andrianov <vita...@ti.com>
There's two problems here. The first is, no floating point math in U-Boot. The second is that between board/ti/ks2_evm/ddr3_spd.c that you're adding and drivers/ddr/fsl/ddr3_dimm_params.c and drivers/ddr/mvebu/ddr3_spd.c it seems like we have two and you would add a 3rd file for reading the standard-defined SPD data. We need one set of functions in drivers/ddr/ to read the spd information and do whatever really common bits can be done with it and the rest in drivers/ddr/subdir/. -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
