Define a new config "zynqmp_ep" for ZynqMP instead
of xilinx_zynqmp. This defconfig supports all emulation
platforms of ZynqMP. Also renamed TARGET_XILINX_ZYNQMP
to ARCH_ZYNQMP.
Signed-off-by: Siva Durga Prasad Paladugu <siva...@xilinx.com>
---
arch/arm/Kconfig | 2 +-
arch/arm/cpu/armv8/Makefile | 2 +-
arch/arm/cpu/armv8/zynqmp/Kconfig | 12 +++++++-
...xilinx_zynqmp_defconfig => zynqmp_ep_defconfig} | 5 ++-
include/configs/xilinx_zynqmp.h | 8 -----
include/configs/zynqmp_ep.h | 29 ++++++++++++++++++++
6 files changed, 44 insertions(+), 14 deletions(-)
rename configs/{xilinx_zynqmp_defconfig => zynqmp_ep_defconfig} (71%)
create mode 100644 include/configs/zynqmp_ep.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ca2c410..ab2f211 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -659,7 +659,7 @@ config ARCH_ZYNQ
select SUPPORT_SPL
select DM
-config TARGET_XILINX_ZYNQMP
+config ARCH_ZYNQMP
bool "Support Xilinx ZynqMP Platform"
select ARM64
diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile
index dee5e25..6466ebb 100644
--- a/arch/arm/cpu/armv8/Makefile
+++ b/arch/arm/cpu/armv8/Makefile
@@ -16,4 +16,4 @@ obj-y += tlb.o
obj-y += transition.o
obj-$(CONFIG_FSL_LSCH3) += fsl-lsch3/
-obj-$(CONFIG_TARGET_XILINX_ZYNQMP) += zynqmp/
+obj-$(CONFIG_ARCH_ZYNQMP) += zynqmp/
diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig
b/arch/arm/cpu/armv8/zynqmp/Kconfig
index b07932e..cf80b08 100644
--- a/arch/arm/cpu/armv8/zynqmp/Kconfig
+++ b/arch/arm/cpu/armv8/zynqmp/Kconfig
@@ -1,4 +1,12 @@
-if TARGET_XILINX_ZYNQMP
+if ARCH_ZYNQMP
+
+choice
+ prompt "Xilinx ZynqMP board select"
+
+config TARGET_ZYNQMP_EP
+ bool "ZynqMP EP Board"
+
+endchoice
config SYS_BOARD
default "zynqmp"
@@ -10,6 +18,6 @@ config SYS_SOC
default "zynqmp"
config SYS_CONFIG_NAME
- default "xilinx_zynqmp"
+ default "zynqmp_ep" if TARGET_ZYNQMP_EP
endif
diff --git a/configs/xilinx_zynqmp_defconfig b/configs/zynqmp_ep_defconfig
similarity index 71%
rename from configs/xilinx_zynqmp_defconfig
rename to configs/zynqmp_ep_defconfig
index c512e9c..6b29eca 100644
--- a/configs/xilinx_zynqmp_defconfig
+++ b/configs/zynqmp_ep_defconfig
@@ -1,6 +1,7 @@
CONFIG_ARM=y
-CONFIG_TARGET_XILINX_ZYNQMP=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp"
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_TARGET_ZYNQMP_EP=y
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-ep"
CONFIG_CMD_BDI=y
CONFIG_CMD_BOOTD=y
CONFIG_CMD_RUN=y
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 880d29c..18cd15b 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -53,7 +53,6 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x400000)
/* Serial setup */
-#define CONFIG_ZYNQ_SERIAL_UART0
#define CONFIG_ZYNQ_SERIAL
#define CONFIG_CONS_INDEX 0
@@ -61,8 +60,6 @@
#define CONFIG_SYS_BAUDRATE_TABLE \
{ 4800, 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_ZYNQ_SDHCI0
-
/* Command line configuration */
#define CONFIG_CMD_ENV
#define CONFIG_CMD_EXT2
@@ -129,9 +126,6 @@
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_MAXARGS 64
-#define CONFIG_ZYNQ_I2C0
-#define CONFIG_SYS_I2C_ZYNQ
-
/* I2C */
#if defined(CONFIG_SYS_I2C_ZYNQ)
# define CONFIG_CMD_I2C
@@ -140,8 +134,6 @@
# define CONFIG_SYS_I2C_ZYNQ_SLAVE 0
#endif
-#define CONFIG_ZYNQMP_EEPROM
-
/* EEPROM */
#ifdef CONFIG_ZYNQMP_EEPROM
# define CONFIG_CMD_EEPROM
diff --git a/include/configs/zynqmp_ep.h b/include/configs/zynqmp_ep.h
new file mode 100644
index 0000000..26dd300
--- /dev/null
+++ b/include/configs/zynqmp_ep.h
@@ -0,0 +1,29 @@
+/*
+ * Configuration for Xilinx ZynqMP emulation
+ * platforms. See zynqmp-common.h for ZynqMP
+ * common configs
+ *
+ * (C) Copyright 2014 - 2015 Xilinx, Inc.
+ * Michal Simek <michal.si...@xilinx.com>
+ * Siva Durga Prasad Paladugu <siva...@xilinx.com>
+ *
+ * Based on Configuration for Versatile Express
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQMP_EP_H
+#define __CONFIG_ZYNQMP_EP_H
+
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
+
+#define CONFIG_ZYNQ_SERIAL_UART0
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_I2C0
+#define CONFIG_SYS_I2C_ZYNQ
+#define CONFIG_ZYNQ_EEPROM
+
+#include <configs/xilinx_zynqmp.h>
+
+#endif /* __CONFIG_ZYNQMP_EP_H */
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
