Hi John, On Jun 1, 2015 3:21 PM, "John Hawley" <john.haw...@intel.com> wrote: > > Shouldn't be an appreciable differences in the boards, how are you > flashing it? Can you punt me a copy of the image so I can try it here > and double check? > > - John
Please see below for the drive link. - Simon > > On 06/01/2015 01:10 PM, Simon Glass wrote: > > +John > > > > Hi Saket, > > > > On 1 June 2015 at 13:45, Saket Sinha <saket.sinh...@gmail.com> wrote: > >> Hi Simon, > >> > >>>> > >>>>>>>> 5. Now when I am powering Minnowmax and collecting the output on serial > >>>>>>>> Nothing appears. > >>>>>>>> > >>> > >>> It seems to boot OK for me. See details and download link below: > >>> Download u-boot.rom from: > >>> https://drive.google.com/file/d/0B7WYZbZ9zd-3eDFaNHpFN2JrcUE/view?usp=sharing > >>> > >> > >> With this image also, I do not get any output on my serial port(though > >> two blue leds D1 & D2 are lighted up) which I run by "screen > >> /dev/ttyUSB0 115200" using USB to Serial TTL Level sent to me by John. > >> > >> When I flash MinnowBoard.MAX.X64.079.R01.bin instead of the > >> u-boot.rom, I get all the UEFI outputs on the same setup. > >> > >> > >>>>>> > >>>>>> Can you confirm that you have setup the flashrom tool correctly? > >>>> > >>>> As of now I am trying to burn u-boot.rom with SPI programmer/software > >>>> on Windows to check the sanity of my flashrom setup. > >>>> > >> > >> I have tried flashing both the u-boot.rom and > >> MinnowBoard.MAX.X64.079.R01.bin with the Dediprog Engineering software > >> on Windows with exactly same results for both the cases as with > >> flashrom so atleast flashrom setup is correct. > > > > Yes. I'm not sure what to do here sorry. That image works for me. Is > > it possible that you have a different board variant to me? Is it the > > dual core one? > > > > Regards, > > Simon > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
