Hello Stefano,
On 06/01/2015 01:15 PM, Stefano Babic wrote:
Hi Bhuvanchandra,
On 18/05/2015 15:06, Bhuvanchandra DV wrote:
Most of the drivers available for Vybrid are not yet converted
to OF model to use device tree model, only few drivers
like SPI and GPIO drivers use device trees.
Add separate defconfig for who needs to use device tree model.
Later this can be integrated to single defconfig.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra...@toradex.com>
---
configs/colibri_vf_dtb_defconfig | 6 ++++++
1 file changed, 6 insertions(+)
create mode 100644 configs/colibri_vf_dtb_defconfig
diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
new file mode 100644
index 0000000..28ff1e9
--- /dev/null
+++ b/configs/colibri_vf_dtb_defconfig
@@ -0,0 +1,6 @@
+CONFIG_ARM=y
+CONFIG_TARGET_COLIBRI_VF=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND"
+CONFIG_DM=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
This patch is broken because NAND setup is missing and the board
colibri_vf_dtp is not built.
Indeed, it is fixed with:
diff --git a/configs/colibri_vf_dtb_defconfig
b/configs/colibri_vf_dtb_defconfig
index 28ff1e9..88ecbdc 100644
--- a/configs/colibri_vf_dtb_defconfig
+++ b/configs/colibri_vf_dtb_defconfig
@@ -4,3 +4,5 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_I
CONFIG_DM=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
+CONFIG_NAND_VF610_NFC=y
+CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
Please add these to your patch and resubmit, thanks !
Will add this and resubmit the patchset.
Best regards,
Stefano Babic
Best regards,
Bhuvan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
