On Mon, 01 Jun 2015 09:08:55 +0900, Nobuhiro Iwamatsu wrote: > > Hi! > > 015-05-21 15:31 GMT+09:00 Yoshinori Sato <ys...@users.sourceforge.jp>: > > Add device tree support. > > > > Signed-off-by: Yoshinori Sato <ys...@users.sourceforge.jp> > > --- > > doc/device-tree-bindings/serial/sh.txt | 6 ++++++ > > drivers/serial/serial_sh.c | 28 ++++++++++++++++++++++++++++ > > 2 files changed, 34 insertions(+) > > create mode 100644 doc/device-tree-bindings/serial/sh.txt > > 2015-05-21 15:31 GMT+09:00 Yoshinori Sato <ys...@users.sourceforge.jp>: > > Add support for standard type SCI (without FIFO) port. > > > > Signed-off-by: Yoshinori Sato <ys...@users.sourceforge.jp> > > --- > > doc/device-tree-bindings/serial/sh.txt | 2 +- > > drivers/serial/serial_sh.c | 8 ++++++++ > > 2 files changed, 9 insertions(+), 1 deletion(-) > > > > Thanks for your patch. > Sorry, your patch can not apply u-boot/master HEAD. > Could you rebase and resend this patch? >
Oh. I'm Sorry. I will rebase and resend. Thanks. > Best regards, > Nobuhiro > > 2015-05-21 15:31 GMT+09:00 Yoshinori Sato <ys...@users.sourceforge.jp>: > > Add device tree support. > > > > Signed-off-by: Yoshinori Sato <ys...@users.sourceforge.jp> > > --- > > doc/device-tree-bindings/serial/sh.txt | 6 ++++++ > > drivers/serial/serial_sh.c | 28 ++++++++++++++++++++++++++++ > > 2 files changed, 34 insertions(+) > > create mode 100644 doc/device-tree-bindings/serial/sh.txt > > > > diff --git a/doc/device-tree-bindings/serial/sh.txt > > b/doc/device-tree-bindings/serial/sh.txt > > new file mode 100644 > > index 0000000..b23b135 > > --- /dev/null > > +++ b/doc/device-tree-bindings/serial/sh.txt > > @@ -0,0 +1,6 @@ > > +* Renesas SCI serial interface > > + > > +Required properties: > > +- compatible: must be "renesas,scif" or "renesas,scifa" > > +- reg: exactly one register range with length > > +- clock: input clock frequency for the SCI unit > > diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c > > index 8693c1e..32b2bf0 100644 > > --- a/drivers/serial/serial_sh.c > > +++ b/drivers/serial/serial_sh.c > > @@ -17,6 +17,8 @@ > > #include <dm/platform_data/serial_sh.h> > > #include "serial_sh.h" > > > > +DECLARE_GLOBAL_DATA_PTR; > > + > > #if defined(CONFIG_CPU_SH7760) || \ > > defined(CONFIG_CPU_SH7780) || \ > > defined(CONFIG_CPU_SH7785) || \ > > @@ -201,10 +203,35 @@ static const struct dm_serial_ops sh_serial_ops = { > > .setbrg = sh_serial_setbrg, > > }; > > > > +#ifdef CONFIG_OF_CONTROL > > +static const struct udevice_id sh_serial_id[] = { > > + {.compatible = "renesas,scif", .data = PORT_SCIF}, > > + {.compatible = "renesas,scifa", .data = PORT_SCIFA}, > > + {} > > +}; > > + > > +static int sh_serial_ofdata_to_platdata(struct udevice *dev) > > +{ > > + struct sh_serial_platdata *plat = dev_get_platdata(dev); > > + fdt_addr_t addr; > > + > > + addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg"); > > + if (addr == FDT_ADDR_T_NONE) > > + return -EINVAL; > > + > > + plat->base = addr; > > + plat->clk = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "clock", > > 1); > > + plat->type = dev_get_driver_data(dev); > > + return 0; > > +} > > +#endif > > + > > U_BOOT_DRIVER(serial_sh) = { > > .name = "serial_sh", > > .id = UCLASS_SERIAL, > > + .of_match = of_match_ptr(sh_serial_id), > > + .ofdata_to_platdata = of_match_ptr(sh_serial_ofdata_to_platdata), > > + .platdata_auto_alloc_size = sizeof(struct sh_serial_platdata), > > .probe = sh_serial_probe, > > .ops = &sh_serial_ops, > > .flags = DM_FLAG_PRE_RELOC, > > -- > > 2.1.4 > > > > > > -- > Nobuhiro Iwamatsu > iwamatsu at {nigauri.org / debian.org} > GPG ID: 40AD1FA6 -- Yoshinori Sato <ys...@users.sourceforge.jp> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot