As per updated board document, no need to substract 1 from arch[BRD]
bit field. Default value + 'A' represents the board revision.
So update board version print logic to reflect the same.
Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com>
---
Changes for v2: sending as it is for patch set
board/freescale/ls2085ardb/ls2085ardb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/ls2085ardb/ls2085ardb.c
b/board/freescale/ls2085ardb/ls2085ardb.c
index e0a8a41..ff4b6a0 100644
--- a/board/freescale/ls2085ardb/ls2085ardb.c
+++ b/board/freescale/ls2085ardb/ls2085ardb.c
@@ -56,7 +56,7 @@ int checkboard(void)
sw = QIXIS_READ(arch);
printf("Board: %s, ", CONFIG_IDENT_STRING);
printf("Board Arch: V%d, ", sw >> 4);
- printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1);
+ printf("Board version: %c, boot from ", (sw & 0xf) + 'A');
sw = QIXIS_READ(brdcfg[0]);
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
