Hello, I have two versions of u-boot one is U-Boot 2012.10-00142-g56ac3aa-dirty and the latest one is U-Boot 2015.01-linux4sam_4.7-dirty. I am using ATSAMA5D31, the issue that I am facing is that the older version of u-boot i.e. "U-Boot 2012.10-00142-g56ac3aa-dirty" is able to load ramdisk of size greater than 4MB but at later point of time during kernel bootup "External imprecise abort 0x1c06" error is shown and the latest version of u-boot i.e. "U-Boot 2015.01-linux4sam_4.7-dirty" is not able to boot with ramdisk size greater than 4MB and gives error "Verifying Checksum.... Bad Data CRC". I want to use latest u-boot from Atmel with ramdisk of 32MB, I have tried various tricks of passing ramdisk_size=xxxx as bootargs parameter and edited Block Ram size in kernel configuration under Device Drivers->Block Devices also tried to change kernel parameters from Kernel Configuration but nothing worked. Kindly reply.
--------------------------------------------- Thanks & Regards Gaurav Pathak Contact No: 9028531335 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot