This is my best try. I have test it with my old u-boot,
but not with master. Do not have a bench for it.
This is not very important patch. I do not find 
any other ONFI user in u-boot.
Andrei

>From d76b4ae8e866affa15dd9da860574d0600969d57 Mon Sep 17 00:00:00 2001
From: Andrei Yakimov <ayaki...@iptec-inc.com>
Date: Mon, 18 May 2015 18:50:12 -0700
Subject: [PATCH] ONFI detect reading only first parameter page.

NAND_CMD_PARAM read only first parameter page. Need to read all 3
(as per ONFI spec) due to no error correction for this area

Signed-off-by: Andrei Yakimov <ayaki...@iptec-inc.com>
---

 drivers/mtd/nand/fsl_elbc_nand.c |    9 +++++----
 drivers/mtd/nand/fsl_ifc_nand.c  |   10 ++++++----
 2 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c
b/drivers/mtd/nand/fsl_elbc_nand.c
index e85832d..8ac470f 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -336,11 +336,12 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd,
unsigned int command,
                                    (FIR_OP_RBW << FIR_OP2_SHIFT));
                out_be32(&lbc->fcr, command << FCR_CMD0_SHIFT);
                /*
-                * although currently it's 8 bytes for READID, we always read
-                * the maximum 256 bytes(for PARAM)
+                * although currently it's 8 bytes for READID
+                * param page containg at least 3 copy for
+                * robustnes, we need to read them all.
                 */
-               out_be32(&lbc->fbcr, 256);
-               ctrl->read_bytes = 256;
+               out_be32(&lbc->fbcr, (command == NAND_CMD_PARAM) ? 786 : 8);
+               ctrl->read_bytes = (command == NAND_CMD_PARAM) ? 786 : 8;
                ctrl->use_mdr = 1;
                ctrl->mdr = column;
                set_addr(mtd, 0, 0, 0);
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c
b/drivers/mtd/nand/fsl_ifc_nand.c
index 79fa88b..ee96a62 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -459,11 +459,13 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd,
unsigned int command,
                ifc_out32(&ifc->ifc_nand.row3, column);
 
                /*
-                * although currently it's 8 bytes for READID, we always read
-                * the maximum 256 bytes(for PARAM)
+                * although currently it's 8 bytes for READID
+                * param page containg at least 3 copy for
+                * robustnes, we need to read them all.
                 */
-               ifc_out32(&ifc->ifc_nand.nand_fbcr, 256);
-               ctrl->read_bytes = 256;
+               ifc_out32(&ifc->ifc_nand.nand_fbcr,
+                         (command == NAND_CMD_PARAM) ? 786 : 8);
+               ctrl->read_bytes = (command == NAND_CMD_PARAM) ? 786 : 8;
 
                set_addr(mtd, 0, 0, 0);
                fsl_ifc_run_command(mtd);
-- 
1.7.7.6



_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to