Changing to Tom's new email address...
On Fri, May 8, 2015 at 3:22 PM, Joe Hershberger <joe.hershber...@gmail.com> wrote: > Hi Tom, Nobuhiro, > > On Mon, Sep 15, 2014 at 8:51 AM, Tom Rini <tr...@ti.com> wrote: >> On Tue, Sep 02, 2014 at 02:49:36PM +0300, Vasili Galka wrote: >>> Hi Tom, >>> >>> On Thu, Aug 21, 2014 at 2:07 PM, Vasili Galka <vvv...@gmail.com> wrote: >>> >>> > Hi Nobuhiro, >>> > >>> > I'm trying to verify the correct build of all SH boards in U-Boot. What is >>> > the recommended toolchain to use? >>> > >>> > I tried the one from kernel.org [1], but it does not work for all the >>> > boards, >>> > I get build errors like this one: >>> > >>> > Building rsk7203 board... >>> > sh4-linux-gcc: error: command line option '-m3e' is not supported by >>> > this configuration >>> > sh4-linux-gcc: error: command line option '-m3e' is not supported by >>> > this configuration >>> > make[3]: *** [include/autoconf.mk] Error 1 >>> > make[3]: *** [include/autoconf.mk.dep] Error 1 >>> > make[2]: *** [silentoldconfig] Error 1 >>> > make: *** [sub-make] Error 2 >>> > sh4-linux-size: '/home/lab/dev/u-boot/out/all_sh/u-boot': No such file >>> > sh4-linux-gcc: error: command line option '-m3e' is not supported by >>> > this configuration >>> > sh4-linux-gcc: error: command line option '-m3e' is not supported by >>> > this configuration >>> > make[3]: *** [include/autoconf.mk] Error 1 >>> > make[3]: *** Waiting for unfinished jobs.... >>> > make[3]: *** [include/autoconf.mk.dep] Error 1 >>> > 'make -f /home/lab/dev/u-boot/scripts/Makefile.autoconf obj=include >>> > include/autoconf.mk include/autoconf.mk.dep' Failed >>> > make[2]: *** [silentoldconfig] Error 1 >>> > make[1]: *** No rule to make target `include/config/auto.conf', needed >>> > by `include/config/uboot.release'. Stop. >>> > make: *** [sub-make] Error 2 >>> > >>> > I'll appreciate your help. >>> > >>> > [1] https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.3/ >>> > >>> > Regards, >>> > Vasili >>> > >>> >>> What is the state of U-Boot support for the SH architecture? Is it >>> maintained at all? I wanted to verify the build, but failed finding a >>> proper toolchain. I tried contacting the custodian (Nobuhiro), but got no >>> answer. >> >> Good question. Nobuhiro? > > Should we just drop the boards that have no working toolchain? > > rsk7264 > mpr2 > ms7720se > rsk7269 > shmin > rsk7203 > > Thanks, > -Joe _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
