[U-Boot] [PATCH] serial: ns16550: Fix Debug UART initialization for AM335x

[Vasili Galka]

Fixed the init sequence in debug_uart_init() to match the one in
NS16550_init(). Also, fixed the build by conditionally turning on some
of the required code.

Signed-off-by: Vasili Galka <vas...@visionmap.com>
---
 drivers/serial/ns16550.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 03beab5..7af6bd8 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -54,7 +54,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define CONFIG_SYS_NS16550_IER  0x00
 #endif /* CONFIG_SYS_NS16550_IER */
 
-#ifdef CONFIG_DM_SERIAL
+#if defined(CONFIG_DM_SERIAL) || defined(CONFIG_DEBUG_UART_NS16550)
 
 static inline void serial_out_shift(unsigned char *addr, int shift, int value)
 {
@@ -85,6 +85,9 @@ static inline int serial_in_shift(unsigned char *addr, int 
shift)
        return readb(addr);
 #endif
 }
+#endif
+
+#if defined(CONFIG_DM_SERIAL)
 
 static void ns16550_writeb(NS16550_t port, int offset, int value)
 {
@@ -255,6 +258,15 @@ void debug_uart_init(void)
                                    CONFIG_BAUDRATE);
 
        serial_out_shift(&com_port->ier, 0, CONFIG_SYS_NS16550_IER);
+#if defined(CONFIG_OMAP) || defined(CONFIG_AM33XX) || \
+       defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
+       serial_out_shift(&com_port->mdr1, 0, 0x7);      /* mode select reset 
TL16C750*/
+#endif
+       serial_out_shift(&com_port->lcr, 0, UART_LCR_BKSE | UART_LCRVAL);
+       serial_out_shift(&com_port->dll, 0, 0);
+       serial_out_shift(&com_port->dlm, 0, 0);
+       serial_out_shift(&com_port->lcr, 0, UART_LCRVAL);
+
        serial_out_shift(&com_port->mcr, 0, UART_MCRVAL);
        serial_out_shift(&com_port->fcr, 0, UART_FCRVAL);
 
@@ -262,6 +274,12 @@ void debug_uart_init(void)
        serial_out_shift(&com_port->dll, 0, baud_divisor & 0xff);
        serial_out_shift(&com_port->dlm, 0, (baud_divisor >> 8) & 0xff);
        serial_out_shift(&com_port->lcr, 0, UART_LCRVAL);
+#if defined(CONFIG_OMAP) || \
+       defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
+       defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
+       /* /16 is proper to hit 115200 with 48MHz */
+       serial_out_shift(&com_port->mdr1, 0, 0);
+#endif /* CONFIG_OMAP */
 }
 
 static inline void _debug_uart_putc(int ch)
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot