This patch adds device tree for the ST Micro stv0991 board & enables
device tree control. Progressively device tree support for the drivers
being used will also be added.

Signed-off-by: Vikas Manocha <vikas.mano...@st.com>
---

Changes in v2:
- added commit message.

 arch/arm/dts/Makefile     |    1 +
 arch/arm/dts/stv0991.dts  |   23 +++++++++++++++++++++++
 configs/stv0991_defconfig |    1 +
 include/configs/stv0991.h |    3 +++
 4 files changed, 28 insertions(+)
 create mode 100644 arch/arm/dts/stv0991.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 46a6171..86faf58 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -54,6 +54,7 @@ dtb-$(CONFIG_SOCFPGA) +=                              \
        socfpga_arria5_socdk.dtb                        \
        socfpga_cyclone5_socdk.dtb                      \
        socfpga_cyclone5_socrates.dtb
+dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
 
 dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \
        ls1021a-twr.dtb
diff --git a/arch/arm/dts/stv0991.dts b/arch/arm/dts/stv0991.dts
new file mode 100644
index 0000000..b25c48b
--- /dev/null
+++ b/arch/arm/dts/stv0991.dts
@@ -0,0 +1,23 @@
+/dts-v1/;
+
+/ {
+       model = "ST STV0991 application board";
+       compatible = "st,stv0991";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       chosen {
+               stdout-path = &uart0;
+       };
+
+       memory {
+               device_type="memory";
+               reg = <0x0 0x198000>;
+       };
+
+       uart0: serial@0x80406000 {
+               compatible = "arm,pl011", "arm,primecell";
+               reg = <0x80406000 0x1000>;
+               clock = <2700000>;
+       };
+};
diff --git a/configs/stv0991_defconfig b/configs/stv0991_defconfig
index 76ba41b..d9edc06 100644
--- a/configs/stv0991_defconfig
+++ b/configs/stv0991_defconfig
@@ -5,3 +5,4 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_NETDEVICES=y
 CONFIG_NET=y
+CONFIG_DEFAULT_DEVICE_TREE="stv0991"
diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
index 2f65eda..750eebd 100644
--- a/include/configs/stv0991.h
+++ b/include/configs/stv0991.h
@@ -80,4 +80,7 @@
 #define CONFIG_AUTOBOOT_PROMPT                 \
        "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
 #undef CONFIG_HAS_VBAR
+#define CONFIG_OF_EMBED
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_LIBFDT
 #endif /* __CONFIG_H */
-- 
1.7.9.5

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to