On 04/29/2015 01:35 AM, Michal Simek wrote:
> Added routine mmu_set_region_dcache_behaviour() to set a
> particular region as non cacheable.
> 
> Define dummy routine for mmu_set_region_dcache_behaviour()
> to handle incase of dcache off.
> 
> Signed-off-by: Siva Durga Prasad Paladugu <siva...@xilinx.com>
> Signed-off-by: Michal Simek <michal.si...@xilinx.com>
> ---
> 
> Changes in v2:
> - Fix patch subject (remove addional zzz from v1)
> - Remove armv8: caches: Disable dcache after flush patch from this
>   series based on the talk with Mark Rutland (patch is not needed
>   anymore)
> 
>  arch/arm/cpu/armv8/cache_v8.c | 23 +++++++++++++++++++++++
>  arch/arm/include/asm/system.h | 28 ++++++++++++++++++----------
>  2 files changed, 41 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
> index c5ec5297cd39..25a2136a3cdf 100644
> --- a/arch/arm/cpu/armv8/cache_v8.c
> +++ b/arch/arm/cpu/armv8/cache_v8.c
> @@ -139,6 +139,24 @@ int dcache_status(void)
>       return (get_sctlr() & CR_C) != 0;
>  }
>  
> +void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
> +                                  enum dcache_option option)
> +{
> +     /* get the level2_table0 start address */
> +     u64 *page_table = (u64 *)(gd->arch.tlb_addr + 0x3000);

How is this table address defined? For our SoC (fsl-lsch3), we have multiple
level 2 tables. Using fixed address doesn't seem right here.

York
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to