Hi,
On 25-04-15 01:22, Simon Glass wrote:
Hi Hans,
On 24 April 2015 at 07:48, Hans de Goede <hdego...@redhat.com> wrote:
This fixes the following errors being printed during boot:
Error, wrong i2c adapter 0 max 0 possible
Error, wrong i2c adapter 0 max 0 possible
Signed-off-by: Hans de Goede <hdego...@redhat.com>
Where does the error come from?
Somewhere in the i2c code I presume, I did not investigate, I started
by trying to simply disable building the i2c stuff as it makes no sense
to have i2c support build-in when there are no controllers, and that
indeed fixed things.
Regards,
Hans
Reviewed-by: Simon Glass <s...@chromium.org>
---
include/configs/sunxi-common.h | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 3e49aba..f97e626 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -261,14 +261,15 @@
#define CONFIG_SPL_I2C_SUPPORT
#endif
-#define CONFIG_SYS_I2C
#if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
defined CONFIG_I2C4_ENABLE
+#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MVTWSI
-#endif
#define CONFIG_SYS_I2C_SPEED 400000
#define CONFIG_SYS_I2C_SLAVE 0x7f
+#define CONFIG_CMD_I2C
+#endif
#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
#define CONFIG_SYS_I2C_SOFT
@@ -288,8 +289,6 @@ extern int soft_i2c_gpio_scl;
#define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */
#endif
-#define CONFIG_CMD_I2C
-
/* PMU */
#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined
CONFIG_AXP221_POWER
#define CONFIG_SPL_POWER_SUPPORT
--
2.3.5
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
