With SPI flash moving to driver model, commit fbb0991 "dm: Convert
spi_flash_probe() and 'sf probe' to use driver model" ignored the
SST flash-specific write op (byte program & word program), which
actually broke the SST flash from wroking.
This commit makes SST flash work again under driver model, by adding
SST flash-specific handling in the spi_flash_std_write().
Signed-off-by: Bin Meng <bmeng...@gmail.com>
---
Changes in v2:
- Instead of creating an SST flash-specifc driver to handle the write
op, handle that in the standard spi_flash_std_write().
- Drop the crownbay.dts update patch
drivers/mtd/spi/sf_probe.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index ac93114..038fe2d 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -472,6 +472,15 @@ int spi_flash_std_write(struct udevice *dev, u32 offset,
size_t len,
{
struct spi_flash *flash = dev_get_uclass_priv(dev);
+#if defined(CONFIG_SPI_FLASH_SST)
+ if (flash->flags & SST_WR) {
+ if (flash->spi->op_mode_tx & SPI_OPM_TX_BP)
+ return sst_write_bp(flash, offset, len, buf);
+ else
+ return sst_write_wp(flash, offset, len, buf);
+ }
+#endif
+
return spi_flash_cmd_write_ops(flash, offset, len, buf);
}
--
1.8.2.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
