Hi Gabriel, On Fri, Apr 24, 2015 at 12:16 AM, Gabriel Huau <cont...@huau-gabriel.fr> wrote: > This serie of patches adds the support of pin-muxing from the device tree > through > different properties. I have put two example to enable the USB Host on the > minnowboard max. > > The support of the call to 'setup_pch_gpios' is still supported and > only the minnowboard has been tested with the device tree implementation. > > Because the GPIO and IO base register ares different, I have also defined > some proxy function to set the function/value and direction of the GPIO as > the GPIO register can override some registers in the IO. > > Gabriel Huau (4): > x86: baytrail: fix the GPIOBASE address > x86: minnowmax: add GPIO banks in the device tree > x86: gpio: add pinctrl support from the device tree > x86: minnowmax: initialize the pin-muxing from device tree > > arch/x86/dts/minnowmax.dts | 63 +++++++++ > arch/x86/include/asm/arch-baytrail/gpio.h | 3 +- > arch/x86/include/asm/gpio.h | 1 + > board/intel/minnowmax/minnowmax.c | 9 ++ > drivers/gpio/intel_ich6_gpio.c | 222 > ++++++++++++++++++++++++++---- > include/configs/minnowmax.h | 1 + > include/dt-bindings/gpio/gpio.h | 20 +++ > 7 files changed, 292 insertions(+), 27 deletions(-) > > --
Thanks for these patches! Just a general comment, you don't need send emails to u-boot-patc...@bugs.denx.de, and always include a simple sentence in the commit message :) Regards, Bin --- Added to GNATS database as unassigned-patches/148 >Responsible: patch-coord >Message-Id: ><caeuhbmvtxf6nkx62o0jwxatyydbsqduv7syyew7jc-xqujj...@mail.gmail.com> >In-Reply-To: <1429805775-1809-1-git-send-email-cont...@huau-gabriel.fr> >References: <1429805775-1809-1-git-send-email-cont...@huau-gabriel.fr> >Patch-Date: Fri Apr 24 05:23:35 +0200 2015 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
