On 03/20/2015 07:28 PM, York Sun wrote: > This set adds necessary support in common ls2085a support and board > support for QDS and RDB. > > Changes in v5: > Re-generate patches using patman default flags > s/LayerScape/Layerscape/g > Fix board README for inconsistent SoC name > Fix comment in board header file > s/LS2080/LS2085/g > Fix Kconfig help for inconsistent SoC name > Update LS2085AQDS README to include instructions to form NAND image > Update LS2085ARDB README to include instructions to form NAND image > > Changes in v4: > Remove temporary variable cntfrq. > Fix board README for inconsistent SoC name > Fix comments in board header file > Update MAINTAINERS file > Update MAINTAINERS file > > Changes in v3: > Move secondary core fix to mp.c. > Replace hard-coded value with COUNTER_FREQUENCY. > > Changes in v2: > Rebase after adding macros CONFIG_SYS_I2C_MXC_I2C3 in another patch set > Fix CNTFRQ for secondary cores when COUNTER_FREQUENCY_REAL is defined. > Add comment to I2C workaround > > Bhupesh Sharma (1): > armv8/fsl-ch3: Add support to print RCW configuration > > J. German Rivera (2): > drivers/fsl-mc: Changed MC firmware loading for new boot architecture > drivers/fsl-mc: Autoload AOIP image from NOR flash > > Jaiprakash Singh (1): > driver/ifc: Add 64KB page support > > Minghuan Lian (1): > armv8: Add SerDes framework for Layerscape Architecture > > Prabhakar Kushwaha (4): > armv8/ls2085a: Update common header file > driver/ldpaa_eth: Update ldpaa ethernet driver > driver/ldpaa: Add support of WRIOP static data structure > board/ls2085qds: Add support ethernet > > Scott Wood (8): > armv8/fsl-lsch3: Set nodes in DVM domain > fsl-lsch3: Introduce place for common early SoC init > armv8/ls2085a: Add workaround for USB erratum A-008751 > armv8/fsl-lsch3: Use correct compatible for serial clock fixup > armv8/fsl-lsch3: Enable system error aborts > armv8/ls2085aqds: NAND boot support > freescale/qixis: Add support for booting from NAND > armv8/ls2085ardb: Enable NAND SPL support > > Shaohui Xie (1): > net/memac_phy: reuse driver for little endian SoCs > > Yangbo Lu (1): > ls2085a: esdhc: Add esdhc support for ls2085a > > York Sun (7): > armv8/fsl-lsch3: Implement workaround for erratum A008585 > armv8/fsl-lsch3: Fix platform clock calculation > armv8/ls2085a: Fix generic timer clock source > armv8/fsl-lsch3: Update early MMU table > armv8/ls2085aqds: Add support of LS2085AQDS platform > armv8/ls2085ardb: Add support of LS2085ARDB platform > armv8/fsl-lsch3: Implement workaround for I2C issue > > pankaj chauhan (2): > armv8/ls2085a: Add support for reset request > net/phy/cortina: Fix compilation warning >
This set (except 17/28 and 21/28) is applied to fsl-qoriq master, awaiting upstream. [U-Boot,v5,01/28] armv8/fsl-lsch3: Implement workaround for erratum A008585 [U-Boot,v5,02/28] armv8/ls2085a: Update common header file [U-Boot,v5,03/28] armv8/fsl-lsch3: Fix platform clock calculation [U-Boot,v5,04/28] armv8/ls2085a: Fix generic timer clock source [U-Boot,v5,05/28] armv8/ls2085a: Add support for reset request [U-Boot,v5,06/28] armv8/fsl-lsch3: Set nodes in DVM domain [U-Boot,v5,07/28] armv8/fsl-lsch3: Update early MMU table [U-Boot,v5,08/28] fsl-lsch3: Introduce place for common early SoC init [U-Boot,v5,09/28] armv8/ls2085a: Add workaround for USB erratum A-008751 [U-Boot,v5,10/28] armv8/fsl-lsch3: Use correct compatible for serial clock fixup [U-Boot,v5,11/28] driver/ldpaa_eth: Update ldpaa ethernet driver [U-Boot,v5,12/28] armv8: Add SerDes framework for Layerscape Architecture [U-Boot,v5,13/28] net/phy/cortina: Fix compilation warning [U-Boot,v5,14/28] drivers/fsl-mc: Changed MC firmware loading for new boot architecture [U-Boot,v5,15/28] net/memac_phy: reuse driver for little endian SoCs [U-Boot,v5,16/28] armv8/fsl-ch3: Add support to print RCW configuration [U-Boot,v5,18/28] driver/ldpaa: Add support of WRIOP static data structure [U-Boot,v5,19/28] armv8/ls2085aqds: Add support of LS2085AQDS platform [U-Boot,v5,20/28] armv8/ls2085ardb: Add support of LS2085ARDB platform [U-Boot,v5,22/28] board/ls2085qds: Add support ethernet [U-Boot,v5,23/28] driver/ifc: Add 64KB page support [U-Boot,v9,24/28] armv8/ls2085aqds: NAND boot support [U-Boot,v5,25/28] freescale/qixis: Add support for booting from NAND [U-Boot,v9,26/28] armv8/ls2085ardb: Enable NAND SPL support [U-Boot,v5,27/28] ls2085a: esdhc: Add esdhc support for ls2085a [U-Boot,v6,28/28] armv8/fsl-lsch3: Implement workaround for I2C erratum A009203 York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
