On Wed, Apr 15, 2015 at 05:57:55PM -0300, Fabio Estevam wrote: > From: Fabio Estevam <fabio.este...@freescale.com> > > Add the initial SPL support for HummingBoard-i2eX, which is based on a > MX6 Dual. > > For more information about HummingBoard, please check: > http://www.solid-run.com/products/hummingboard/ > > Based on the work from Jon Nettleton and Rabeeh Khoury. > > Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
If you add: diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 7ded5bc..6ba04b2 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -238,6 +238,7 @@ #ifdef CONFIG_SPL #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT #include "imx6_spl.h" #endif Then: > +- Flash the u-boot.img image into the SD card: > + > +sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync Or if the first partition of the SD card is a FAT filesystem: cp u-boot.img /path/to/mount/of/mmcblk0p1/ ; sync It will work from a FAT fs as well. Tested-by: Tom Rini <tr...@konsulko.com> -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
