It is possible for CONFIG_XILINX_EMACLITE to be defined without
XILINX_EMACLITE_BASEADDR being defined as the EMAC Lite driver support
OF init. Check that the driver is enabled and the base address is
available before initializing with a static base address.
Signed-off-by: Nathan Rossi <nathan.ro...@xilinx.com>
---
board/xilinx/microblaze-generic/microblaze-generic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c
b/board/xilinx/microblaze-generic/microblaze-generic.c
index 3110405..375cd0b 100644
--- a/board/xilinx/microblaze-generic/microblaze-generic.c
+++ b/board/xilinx/microblaze-generic/microblaze-generic.c
@@ -109,7 +109,7 @@ int board_eth_init(bd_t *bis)
XILINX_AXIDMA_BASEADDR);
#endif
-#ifdef CONFIG_XILINX_EMACLITE
+#if defined(CONFIG_XILINX_EMACLITE) && defined(XILINX_EMACLITE_BASEADDR)
u32 txpp = 0;
u32 rxpp = 0;
# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
--
1.7.10.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
