> > > > On 15-04-13 01:28:07, Marek Vasut wrote: > > > On Sunday, April 12, 2015 at 07:33:41 AM, maitysancha...@gmail.com > wrote: > > > > Hi, > > > > > > > > On 15-04-11 18:46:15, Marek Vasut wrote: > > > > > On Wednesday, April 08, 2015 at 03:20:04 PM, Sanchayan Maity wrote: > > > > > > Hello, > > > > > > > > > > > > This is the second version of the patchset which adds support > > > > > > for the Toradex Colibri Vybrid VF50 and VF61 modules. Boot up > > > > > > has been tested using the serial loader over UART. > > > > > > > > > > Hi! > > > > > > > > > > Stefano, maybe you can pick 1,2,3,4,6 right away for next? This > > > > > way, we can solve 5/6 separately, since it might need some > > > > > further dicussion. I don't want that patch to block the rest of > > > > > the series though. > > > > > > > > The sixth patch has some minor dependencies on the fifth patch > > > > like some #defines and configuration we enable for Colibri. In > > > > case the fifth patch will require some more discussion and time, > > > > then I guess I will need to rework the sixth patch and then > > > > everything related to USB can go in a later patch. The rework will > > > > be minor. So the v3 will be without USB support > > > > > > Well, if you want to rework the 6th patch, that'd be very nice of > > > you :) > > > > Yes sure. Will put the USB support in the end or not, the first > > patches can go in atleast since there seem to be no complaints on them so > > far. > > > > > > and USB will go in later once this gets applied. Perhaps we will > > > > send the USB along with some more other featureset addition like > > > > gpio support for Vybrid which my colleague did recently along with > > > > some driver model/dt stuff. > > > > > > My impression is that the USB is just a matter of figuring out where > > > the PHY registers go -- whether in arch/arm/include/imx-common or > > > into include/usb/ . I'd be more inclined for the later, since the > > > PHY regs looks like chipidea IP specific thing, but I might be wrong. > > > > I would say it looks like chipidea specific but I have not looked at > > IPs other than Freescale controllers to be sure. > > I think it's CI-specific indeed, thus include/usb/ . +CC Peter, who might > chime in > whether the PHY is CI-specific or IMX-specific. >
Which PHY? Vybrid? In Linux kernel, it belongs to mxs PHY. The same controller can integrate different PHYs. Peter _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
