On Monday, April 13, 2015 at 07:37:42 AM, maitysancha...@gmail.com wrote: > Hello, > > On 15-04-13 01:29:39, Marek Vasut wrote: > > On Wednesday, April 08, 2015 at 03:20:09 PM, Sanchayan Maity wrote: > > > This driver adds support for the USB peripheral on Freescale Vybrid > > > SoC's. > > > > > > Signed-off-by: Sanchayan Maity <maitysancha...@gmail.com> > > > --- > > > > > > arch/arm/include/asm/arch-vf610/crm_regs.h | 10 ++ > > > arch/arm/include/asm/arch-vf610/imx-regs.h | 4 + > > > arch/arm/include/asm/arch-vf610/regs-usbphy.h | 31 ++++ > > > drivers/usb/host/Makefile | 1 + > > > drivers/usb/host/ehci-vf.c | 196 > > > > > > ++++++++++++++++++++++++++ 5 files changed, 242 insertions(+) > > > > > > create mode 100644 arch/arm/include/asm/arch-vf610/regs-usbphy.h > > > create mode 100644 drivers/usb/host/ehci-vf.c > > > > A general hint, you can replace sequences of code like this: > > > > var = readl(foo); > > var |= BIT_BAR; > > writel(var, addr); > > > > with > > > > setbits_le32(var, BIT_BAR); > > > > Same applies for clearing -- clrbits_le32() and both setting and > > clearing -- clrsetbits_le32(). > > Sorry about that. It is something which I use in the sixth patch > as well in the board files but it skipped my mind while doing this > driver. Will take care of it in v3 which seems imminent. > > Noted, thanks :).
Thank you :) Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
