This may happen when using an USB1 device on a controller that only supports
USB2 (e.g. EHCI). Reading the first descriptor will fail (read 0 byte), so we
can abort the process at this point instead of failing later and wasting time.
Signed-off-by: Paul Kocialkowski <cont...@paulk.fr>
---
common/usb.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/common/usb.c b/common/usb.c
index 6ed3124..f648847 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -956,7 +956,7 @@ int usb_new_device(struct usb_device *dev)
*/
#ifndef CONFIG_USB_XHCI
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64);
- if (err < 0) {
+ if (err < sizeof(struct usb_device_descriptor)) {
debug("usb_new_device: usb_get_descriptor() failed\n");
return -EIO;
}
@@ -996,6 +996,9 @@ int usb_new_device(struct usb_device *dev)
case 64:
dev->maxpacketsize = PACKET_SIZE_64;
break;
+ default:
+ printf("usb_new_device: invalid max packet size\n");
+ return -EIO;
}
dev->devnum = addr;
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
