Hi, I am using u-boot-2015.01 loader on MPC8641D based Board. I have following queries Related to PCIe bus 1. Does it provide support to pcie switch(PES64H16AG2) support? 2. Do I need any specific driver for this switch to make it up?
After booting its not showing any link the logs are: U-Boot 2015.01 (Mar 23 2015 - 16:02:00) CPU: 8641D, Version: 3.0, (0x80900130) Core: e600 Core 0, Version: 2.2, (0x80040202) Clock Configuration: CPU:1200 MHz, MPX:400 MHz DDR:200 MHz (400 MT/s data rate), LBC:25 MHz L1: D-cache 32 KiB enabled I-cache 32 KiB enabled L2: 512 KiB enabled Board: ESM From Vrinda Technologies Pvt Ltd (ref: BOSS) I2C: ready DRAM: 1 GiB Flash: 384 MiB SRIO1: enabled PCIe1: Root Complex, no link, regs @ 0xd0008000 PCIe1: Bus 00 - 00 In: serial Out: serial Err: serial Net: eTSEC1 [PRIME], eTSEC2, eTSEC3, eTSEC4 Hit any key to stop autoboot: 0 Any pointers/debugging tips to bring it up will be really helpful Thanks & Regards @$HI$H _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot