On 1 April 2015 at 17:02, David Dueck <davidcdu...@googlemail.com> wrote:
> The timeout value is never reset during the transfer. This means that when
> transferring more data we eventually trigger the timeout.
>
> This was reported on the mailing list:
> "Spansion SPI flash read timeout with AM335x"
>
> Signed-off-by: David Dueck <davidcdu...@googlemail.com>
> CC: Tom Rini <tr...@konsulko.com>
> CC: Jagannadh Teki <jagannadh@t...@gmail.com>
> CC: Stefan Roese <s...@denx.de>
> CC: Andy Pont <andy.p...@sdcsystems.com>
> ---
> drivers/spi/omap3_spi.c | 20 ++++++++++++--------
> 1 file changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
> index 651e46e..c1b4b33 100644
> --- a/drivers/spi/omap3_spi.c
> +++ b/drivers/spi/omap3_spi.c
> @@ -20,7 +20,7 @@
> #include <asm/io.h>
> #include "omap3_spi.h"
>
> -#define SPI_WAIT_TIMEOUT 3000000
> +#define SPI_WAIT_TIMEOUT 10
>
> static void spi_reset(struct omap3_spi_slave *ds)
> {
> @@ -227,7 +227,7 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int
> len, const void *txp,
> {
> struct omap3_spi_slave *ds = to_omap3_spi(slave);
> int i;
> - int timeout = SPI_WAIT_TIMEOUT;
> + ulong start;
> int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
>
> /* Enable the channel */
> @@ -241,9 +241,10 @@ int omap3_spi_write(struct spi_slave *slave, unsigned
> int len, const void *txp,
>
> for (i = 0; i < len; i++) {
> /* wait till TX register is empty (TXS == 1) */
> + start = get_timer(0);
> while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
> OMAP3_MCSPI_CHSTAT_TXS)) {
> - if (--timeout <= 0) {
> + if (get_timer(0) - start > SPI_WAIT_TIMEOUT) {
> printf("SPI TXS timed out, status=0x%08x\n",
>
> readl(&ds->regs->channel[ds->slave.cs].chstat));
> return -1;
> @@ -280,7 +281,7 @@ int omap3_spi_read(struct spi_slave *slave, unsigned int
> len, void *rxp,
> {
> struct omap3_spi_slave *ds = to_omap3_spi(slave);
> int i;
> - int timeout = SPI_WAIT_TIMEOUT;
> + ulong start;
> int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
>
> /* Enable the channel */
> @@ -295,10 +296,11 @@ int omap3_spi_read(struct spi_slave *slave, unsigned
> int len, void *rxp,
> writel(0, &ds->regs->channel[ds->slave.cs].tx);
>
> for (i = 0; i < len; i++) {
> + start = get_timer(0);
> /* Wait till RX register contains data (RXS == 1) */
> while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
> OMAP3_MCSPI_CHSTAT_RXS)) {
> - if (--timeout <= 0) {
> + if (get_timer(0) - start > SPI_WAIT_TIMEOUT) {
I think this is redundant, please check ie negation to start
what about this
start = get_timer(0);
-----
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
> printf("SPI RXS timed out, status=0x%08x\n",
>
> readl(&ds->regs->channel[ds->slave.cs].chstat));
> return -1;
> @@ -332,7 +334,7 @@ int omap3_spi_txrx(struct spi_slave *slave, unsigned int
> len,
> const void *txp, void *rxp, unsigned long flags)
> {
> struct omap3_spi_slave *ds = to_omap3_spi(slave);
> - int timeout = SPI_WAIT_TIMEOUT;
> + ulong start;
> int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
> int irqstatus = readl(&ds->regs->irqstatus);
> int i=0;
> @@ -350,9 +352,10 @@ int omap3_spi_txrx(struct spi_slave *slave, unsigned int
> len,
> for (i=0; i < len; i++){
> /* Write: wait for TX empty (TXS == 1)*/
> irqstatus |= (1<< (4*(ds->slave.bus)));
> + start = get_timer(0);
> while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
> OMAP3_MCSPI_CHSTAT_TXS)) {
> - if (--timeout <= 0) {
> + if (get_timer(0) - start > SPI_WAIT_TIMEOUT) {
> printf("SPI TXS timed out, status=0x%08x\n",
>
> readl(&ds->regs->channel[ds->slave.cs].chstat));
> return -1;
> @@ -368,9 +371,10 @@ int omap3_spi_txrx(struct spi_slave *slave, unsigned int
> len,
> writel(((u8 *)txp)[i], tx);
>
> /*Read: wait for RX containing data (RXS == 1)*/
> + start = get_timer(0);
> while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
> OMAP3_MCSPI_CHSTAT_RXS)) {
> - if (--timeout <= 0) {
> + if (get_timer(0) - start > SPI_WAIT_TIMEOUT) {
> printf("SPI RXS timed out, status=0x%08x\n",
>
> readl(&ds->regs->channel[ds->slave.cs].chstat));
> return -1;
> --
> 2.3.4
thanks!
--
Jagan.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
