Hi all, I just tried to build the latest master mainline u-boot for a xilinx zynq 7010 board called the red pitaya. I'm not affiliated at all with the board, just trying to use it with a recent version of u-boot (and linux). Unfortunately it gets stuck in a reset loop (I wasn't able to nail down why, but it was definitely something in u-boot). However, I was able to successfully build u-boot using the xilinx fork here: https://github.com/Xilinx/u-boot-xlnx and have it work fine.
I've attached the patch I made to add minimal support for the red pitaya (SD boot only, no ethernet as it uses an unsupported lantiq chipset). It is the policy of the xilinx u-boot fork that board support should be pushed straight upstream, but I'm not sure if this is the right place seeing as the upstream version doesn't currently work. Could someone please give me some advice on what to do with this patch? Thanks, Jeremy
redpitaya.patch
Description: Binary data
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
