Hi Sjoerd, On 24 March 2015 at 01:46, Sjoerd Simons <sjoerd.sim...@collabora.co.uk> wrote: > > Hey Simon, > > On Mon, 2015-03-23 at 15:04 -0600, Simon Glass wrote: > > Hi Sjoerd, > > > > On 12 March 2015 at 15:33, Sjoerd Simons <sjoerd.sim...@collabora.co.uk> > > wrote: > > > The peach boards have their SDRAM start address at 0x20000000 instead of > > > 0x40000000 which seems common for all other exynos5 based boards. This > > > means the layout set in exynos5-common.h causes the kernel be loaded > > > more then 128MB (at 0x42000000) away from memory start which breaks > > > booting kernels with CONFIG_AUTO_ZRELADDR > > > > > > Define a custom MEM_LAYOUT_ENV_SETTINGS for both peach boards which uses > > > the same offsets from start of memory as the common exynos5 settings. > > > > > > This fixes booting via bootz and PXE > > <snip> > > > It would be great if we could have this in the device tree. > > > > I haven't merged this patch yet, but it goes some of the way: > > > > http://patchwork.ozlabs.org/patch/402714/ > > I think it would be awesome to have this via device tree as well as that > would be another step closer to allowing one u-boot binary for a group > of boards. However, that's clearly much more work. So for the short term > (and ideally the coming release) i'd quite prefer this minimal change > to go in to unbreak bootz and PXE on these boards.
OK. Reviewed-by: Simon Glass <s...@chromium.org> Who is going to apply this? Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
