The LS2080ARDB is a evaluation platform that supports LS2080A
family SoCs. This patch add sbasic support for the platform.
Signed-off-by: York Sun <york...@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sha...@freescale.com>
Signed-off-by: Scott Wood <scottw...@freescale.com>
Change-Id: I7744b17f074488989de998ab7d487c437cc8eedf
---
arch/arm/Kconfig | 11 +++
arch/arm/cpu/armv8/fsl-lsch3/README | 4 +-
board/freescale/{ls2085aqds => ls2085ardb}/Kconfig | 6 +-
board/freescale/ls2085ardb/MAINTAINERS | 7 ++
.../freescale/{ls2085aqds => ls2085ardb}/Makefile | 2 +-
board/freescale/{ls2085aqds => ls2085ardb}/README | 46 ++++--------
board/freescale/{ls2085aqds => ls2085ardb}/ddr.c | 0
board/freescale/{ls2085aqds => ls2085ardb}/ddr.h | 6 +-
.../ls2085aqds.c => ls2085ardb/ls2085ardb.c} | 54 +++------------
.../ls2085ardb_qixis.h} | 12 +---
...qds_ddr4_nor_defconfig => ls2085ardb_defconfig} | 2 +-
include/configs/{ls2085aqds.h => ls2085ardb.h} | 73 ++++++++------------
12 files changed, 80 insertions(+), 143 deletions(-)
copy board/freescale/{ls2085aqds => ls2085ardb}/Kconfig (66%)
create mode 100644 board/freescale/ls2085ardb/MAINTAINERS
copy board/freescale/{ls2085aqds => ls2085ardb}/Makefile (81%)
copy board/freescale/{ls2085aqds => ls2085ardb}/README (73%)
copy board/freescale/{ls2085aqds => ls2085ardb}/ddr.c (100%)
copy board/freescale/{ls2085aqds => ls2085ardb}/ddr.h (93%)
copy board/freescale/{ls2085aqds/ls2085aqds.c => ls2085ardb/ls2085ardb.c} (76%)
copy board/freescale/{ls2085aqds/ls2085aqds_qixis.h =>
ls2085ardb/ls2085ardb_qixis.h} (61%)
copy configs/{ls1021aqds_ddr4_nor_defconfig => ls2085ardb_defconfig} (66%)
copy include/configs/{ls2085aqds.h => ls2085ardb.h} (80%)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f4a7851..7478eb4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -658,6 +658,16 @@ config TARGET_LS2085AQDS
development platform that supports the QorIQ LS2085A
Layerscape Architecture processor.
+config TARGET_LS2085ARDB
+ bool "Support ls2085ardb"
+ select ARM64
+ select ARMV8_MULTIENTRY
+ help
+ Support for Freescale LS2085ARDB platform.
+ The LS2080A Reference design board (RDB) is a high-performance
+ development platform that supports the QorIQ LS2085A
+ LayerScape Architecture processor.
+
config TARGET_LS1021AQDS
bool "Support ls1021aqds"
select CPU_V7
@@ -804,6 +814,7 @@ source "board/embest/mx6boards/Kconfig"
source "board/esg/ima3-mx53/Kconfig"
source "board/freescale/ls2085a/Kconfig"
source "board/freescale/ls2085aqds/Kconfig"
+source "board/freescale/ls2085ardb/Kconfig"
source "board/freescale/ls1021aqds/Kconfig"
source "board/freescale/ls1021atwr/Kconfig"
source "board/freescale/mx23evk/Kconfig"
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/README
b/arch/arm/cpu/armv8/fsl-lsch3/README
index 817ea1b..4f36e2a 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/README
+++ b/arch/arm/cpu/armv8/fsl-lsch3/README
@@ -38,7 +38,7 @@ Flash Layout
32-MB NOR flash layout for pre-silicon platforms (simulator and
emulator)
(2) A typical layout of various images (including Linux and other firmware
images)
- is shown below considering a 128MB NOR flash device present on QDS
+ is shown below considering a 128MB NOR flash device present on QDS and RDB
boards:
----------------------------------------- ----> 0x5_8800_0000 ---
| .. Unused .. (7M) | |
@@ -86,7 +86,7 @@ Flash Layout
| RCW and PBI (1M) | |
----------------------------------------- ----> 0x5_8000_0000 ---
- 128-MB NOR flash layout for QDS board
+ 128-MB NOR flash layout for QDS and RDB boards
Environment Variables
=====================
diff --git a/board/freescale/ls2085aqds/Kconfig
b/board/freescale/ls2085ardb/Kconfig
similarity index 66%
copy from board/freescale/ls2085aqds/Kconfig
copy to board/freescale/ls2085ardb/Kconfig
index deb640d..85a3dcd 100644
--- a/board/freescale/ls2085aqds/Kconfig
+++ b/board/freescale/ls2085ardb/Kconfig
@@ -1,8 +1,8 @@
-if TARGET_LS2085AQDS
+if TARGET_LS2085ARDB
config SYS_BOARD
- default "ls2085aqds"
+ default "ls2085ardb"
config SYS_VENDOR
default "freescale"
@@ -11,6 +11,6 @@ config SYS_SOC
default "fsl-lsch3"
config SYS_CONFIG_NAME
- default "ls2085aqds"
+ default "ls2085ardb"
endif
diff --git a/board/freescale/ls2085ardb/MAINTAINERS
b/board/freescale/ls2085ardb/MAINTAINERS
new file mode 100644
index 0000000..436039f
--- /dev/null
+++ b/board/freescale/ls2085ardb/MAINTAINERS
@@ -0,0 +1,7 @@
+LS2085A BOARD
+M: Prabhakar Kushwaha <prabha...@freescale.com>
+S: Maintained
+F: board/freescale/ls2085ardb/
+F: board/freescale/ls2085a/ls2085ardb.c
+F: include/configs/ls2085ardb.h
+F: configs/ls2085ardb_defconfig
diff --git a/board/freescale/ls2085aqds/Makefile
b/board/freescale/ls2085ardb/Makefile
similarity index 81%
copy from board/freescale/ls2085aqds/Makefile
copy to board/freescale/ls2085ardb/Makefile
index f174f33..0bfe21c 100644
--- a/board/freescale/ls2085aqds/Makefile
+++ b/board/freescale/ls2085ardb/Makefile
@@ -4,5 +4,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += ls2085aqds.o
+obj-y += ls2085ardb.o
obj-y += ddr.o
diff --git a/board/freescale/ls2085aqds/README
b/board/freescale/ls2085ardb/README
similarity index 73%
copy from board/freescale/ls2085aqds/README
copy to board/freescale/ls2085ardb/README
index a4d7b53..19f9d2a 100644
--- a/board/freescale/ls2085aqds/README
+++ b/board/freescale/ls2085ardb/README
@@ -1,10 +1,8 @@
Overview
--------
-The LS2080A Development System (QDS) is a high-performance computing,
+The LS2080A Reference Design (RDB) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LS2080A
-LayerScape Architecture processor. The LS2080AQDS provides validation and
-SW development platform for the Freescale LS2080A processor series, with
-a complete debugging environment.
+LayerScape Architecture processor.
LS2085A SoC Overview
------------------
@@ -50,14 +48,11 @@ The LS2085A SoC includes the following function and
features:
- Service processor (SP) provides pre-boot initialization and secure-boot
capabilities
- LS2080AQDS board Overview
+ LS2080aRDB board Overview
-----------------------
- SERDES Connections, 16 lanes supporting:
- PCI Express - 3.0
- - SGMII, SGMII 2.5
- - QSGMII
- SATA 3.0
- - XAUI
- XFI
- DDR Controller
- Two ports of 72-bits (8-bits ECC) DDR4. Each port supports four
@@ -66,31 +61,20 @@ The LS2085A SoC includes the following function and
features:
and two DIMM connectors. Support is up to 1600MT/s.
-IFC/Local Bus
- IFC rev. 2.0 implementation supporting Little Endian connection scheme.
- - One in-socket 128 MB NOR flash 16-bit data bus
- - One 512 MB NAND flash with ECC support
- - IFC Test Port
- - PromJet Port
- - FPGA connection
+ - 128 MB NOR flash 16-bit data bus
+ - One 2 GB NAND flash with ECC support
+ - CPLD connection
- USB 3.0
- Two high speed USB 3.0 ports
- First USB 3.0 port configured as Host with Type-A connector
- Second USB 3.0 port configured as OTG with micro-AB connector
- - SDHC: PCIe x1 Right Angle connector for supporting following cards
- - 1/4-/8-bit SD/MMC Legacy CARD supporting 3.3V devices only
- - 1-/4-/8-bit SD/MMC Card supporting 1.8V devices only
- - 4-bit eMMC Card Rev 4.4 (1.8V only)
- - 8-bit eMMC Card Rev 4.5 (1.8V only)
+ - SDHC adapter
- SD Card Rev 2.0 and Rev 3.0
- - DSPI: 3 high-speed flash Memory for storage
- - 16 MB high-speed flash Memory for boot code and storage (up to 108MHz)
- - 8 MB high-speed flash Memory (up to 104 MHz)
- - 512 MB low-speed flash Memory (up to 40 MHz)
- - QSPI: via NAND/QSPI Card
+ - DSPI
+ - 128 MB high-speed flash Memory for boot code and storage (up to 108MHz)
- 4 I2C controllers
- Two SATA onboard connectors
- UART
- - Two 4-pin (HW control) or four 2-pin (SW control) serial ports at up to
115.2 Kbit/s
- - Two DB9 D-Type connectors supporting one Serial port each
- ARM JTAG support
Memory map from core's view
@@ -110,20 +94,16 @@ IFC region map from core's view
-------------------------------
During boot i.e. IFC Region #1:-
0x30000000 - 0x37ffffff : 128MB : NOR flash
- 0x38000000 - 0x3BFFFFFF : 64MB : Promjet
- 0x3C000000 - 0x40000000 : 64MB : FPGA etc
+ 0x3C000000 - 0x40000000 : 64MB : CPLD
After relocate to DDR i.e. IFC Region #2:-
0x5_1000_0000..0x5_1fff_ffff Memory Hole
- 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB)
+ 0x5_2000_0000..0x5_3fff_ffff IFC CSx (CPLD, NAND and others 512MB)
0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
Booting Options
---------------
-a) Promjet Boot
-b) NOR boot
-c) NAND boot
-d) SD boot
-e) QSPI boot
+a) NOR boot
+b) NAND boot
diff --git a/board/freescale/ls2085aqds/ddr.c b/board/freescale/ls2085ardb/ddr.c
similarity index 100%
copy from board/freescale/ls2085aqds/ddr.c
copy to board/freescale/ls2085ardb/ddr.c
diff --git a/board/freescale/ls2085aqds/ddr.h b/board/freescale/ls2085ardb/ddr.h
similarity index 93%
copy from board/freescale/ls2085aqds/ddr.h
copy to board/freescale/ls2085ardb/ddr.h
index b76ea61..bda9d4a 100644
--- a/board/freescale/ls2085aqds/ddr.h
+++ b/board/freescale/ls2085ardb/ddr.h
@@ -29,9 +29,9 @@ static const struct board_specific_parameters udimm0[] = {
* ranks| mhz| GB |adjst| start | ctl2 | ctl3
*/
{2, 1350, 0, 4, 6, 0x0708090B, 0x0C0D0E09,},
- {2, 1666, 0, 4, 7, 0x08090A0C, 0x0D0F100B,},
- {2, 1900, 0, 4, 7, 0x09090B0D, 0x0E10120B,},
- {2, 2300, 0, 4, 8, 0x090A0C0F, 0x1012130C,},
+ {2, 1666, 0, 4, 8, 0x08090B0D, 0x0E10100C,},
+ {2, 1900, 0, 4, 8, 0x090A0C0E, 0x1012120D,},
+ {2, 2300, 0, 4, 9, 0x0A0B0C10, 0x1114140E,},
{}
};
diff --git a/board/freescale/ls2085aqds/ls2085aqds.c
b/board/freescale/ls2085ardb/ls2085ardb.c
similarity index 76%
copy from board/freescale/ls2085aqds/ls2085aqds.c
copy to board/freescale/ls2085ardb/ls2085ardb.c
index f7ed5b9..d05f2bc 100644
--- a/board/freescale/ls2085aqds/ls2085aqds.c
+++ b/board/freescale/ls2085ardb/ls2085ardb.c
@@ -19,7 +19,7 @@
#include <asm/arch-fsl-lsch3/soc.h>
#include "../common/qixis.h"
-#include "ls2085aqds_qixis.h"
+#include "ls2085ardb_qixis.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -43,11 +43,7 @@ unsigned long long get_qixis_addr(void)
int checkboard(void)
{
- char buf[64];
u8 sw;
- static const char *const freq[] = {"100", "125", "156.25",
- "100 separate SSCG"};
- int clock;
sw = QIXIS_READ(arch);
printf("Board: %s, ", CONFIG_IDENT_STRING);
@@ -59,41 +55,20 @@ int checkboard(void)
if (sw < 0x8)
printf("vBank: %d\n", sw);
- else if (sw == 0x8)
- puts("PromJet\n");
else if (sw == 0x9)
puts("NAND\n");
- else if (sw == 0x15)
- printf("IFCCard\n");
else
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
- printf("FPGA: v%d (%s), build %d",
- (int)QIXIS_READ(scver), qixis_read_tag(buf),
- (int)qixis_read_minor());
- /* the timestamp string contains "\n" at the end */
- printf(" on %s", qixis_read_time(buf));
+ printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
- /*
- * Display the actual SERDES reference clocks as configured by the
- * dip switches on the board. Note that the SWx registers could
- * technically be set to force the reference clocks to match the
- * values that the SERDES expects (or vice versa). For now, however,
- * we just display both values and hope the user notices when they
- * don't match.
- */
puts("SERDES1 Reference : ");
- sw = QIXIS_READ(brdcfg[2]);
- clock = (sw >> 6) & 3;
- printf("Clock1 = %sMHz ", freq[clock]);
- clock = (sw >> 4) & 3;
- printf("Clock2 = %sMHz", freq[clock]);
+ printf("Clock1 = 156.25MHz ");
+ printf("Clock2 = 156.25MHz");
puts("\nSERDES2 Reference : ");
- clock = (sw >> 2) & 3;
- printf("Clock1 = %sMHz ", freq[clock]);
- clock = (sw >> 0) & 3;
- printf("Clock2 = %sMHz\n", freq[clock]);
+ printf("Clock1 = 100MHz ");
+ printf("Clock2 = 100MHz\n");
return 0;
}
@@ -121,21 +96,6 @@ unsigned long get_board_sys_clk(void)
return 66666666;
}
-unsigned long get_board_ddr_clk(void)
-{
- u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
-
- switch ((ddrclk_conf & 0x30) >> 4) {
- case QIXIS_DDRCLK_100:
- return 100000000;
- case QIXIS_DDRCLK_125:
- return 125000000;
- case QIXIS_DDRCLK_133:
- return 133333333;
- }
- return 66666666;
-}
-
int select_i2c_ch_pca9547(u8 ch)
{
int ret;
@@ -158,6 +118,8 @@ int board_init(void)
#endif
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN);
+
return 0;
}
diff --git a/board/freescale/ls2085aqds/ls2085aqds_qixis.h
b/board/freescale/ls2085ardb/ls2085ardb_qixis.h
similarity index 61%
copy from board/freescale/ls2085aqds/ls2085aqds_qixis.h
copy to board/freescale/ls2085ardb/ls2085ardb_qixis.h
index bb43e65..cb60c00 100644
--- a/board/freescale/ls2085aqds/ls2085aqds_qixis.h
+++ b/board/freescale/ls2085ardb/ls2085ardb_qixis.h
@@ -4,8 +4,8 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __LS2_QDS_QIXIS_H__
-#define __LS2_QDS_QIXIS_H__
+#ifndef __LS2_RDB_QIXIS_H__
+#define __LS2_RDB_QIXIS_H__
/* SYSCLK */
#define QIXIS_SYSCLK_66 0x0
@@ -17,10 +17,4 @@
#define QIXIS_SYSCLK_160 0x6
#define QIXIS_SYSCLK_166 0x7
-/* DDRCLK */
-#define QIXIS_DDRCLK_66 0x0
-#define QIXIS_DDRCLK_100 0x1
-#define QIXIS_DDRCLK_125 0x2
-#define QIXIS_DDRCLK_133 0x3
-
-#endif /*__LS2_QDS_QIXIS_H__*/
+#endif /*__LS2_RDB_QIXIS_H__*/
diff --git a/configs/ls1021aqds_ddr4_nor_defconfig
b/configs/ls2085ardb_defconfig
similarity index 66%
copy from configs/ls1021aqds_ddr4_nor_defconfig
copy to configs/ls2085ardb_defconfig
index 3c57481..6b64f71 100644
--- a/configs/ls1021aqds_ddr4_nor_defconfig
+++ b/configs/ls2085ardb_defconfig
@@ -1,3 +1,3 @@
CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
CONFIG_ARM=y
-CONFIG_TARGET_LS1021AQDS=y
+CONFIG_TARGET_LS2085ARDB=y
diff --git a/include/configs/ls2085aqds.h b/include/configs/ls2085ardb.h
similarity index 80%
copy from include/configs/ls2085aqds.h
copy to include/configs/ls2085ardb.h
index 70162e7..5f7ea7b 100644
--- a/include/configs/ls2085aqds.h
+++ b/include/configs/ls2085ardb.h
@@ -4,24 +4,26 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __LS2_QDS_H
-#define __LS2_QDS_H
+#ifndef __LS2_RDB_H
+#define __LS2_RDB_H
#include "ls2085a_common.h"
#include <config_cmd_default.h>
-#define CONFIG_IDENT_STRING " LS2085A-QDS"
-#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-QDS"
+#define CONFIG_IDENT_STRING " LS2085A-RDB"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-RDB"
+
+#undef CONFIG_CONS_INDEX
+#define CONFIG_CONS_INDEX 2
#define CONFIG_DISPLAY_BOARDINFO
#ifndef __ASSEMBLY__
unsigned long get_board_sys_clk(void);
-unsigned long get_board_ddr_clk(void);
#endif
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
-#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
+#define CONFIG_DDR_CLK_FREQ 133333333
#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4)
#define CONFIG_DDR_SPD
@@ -30,8 +32,8 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
#define SPD_EEPROM_ADDRESS1 0x51
#define SPD_EEPROM_ADDRESS2 0x52
-#define SPD_EEPROM_ADDRESS3 0x53
-#define SPD_EEPROM_ADDRESS4 0x54
+#define SPD_EEPROM_ADDRESS3 0x54
+#define SPD_EEPROM_ADDRESS4 0x53 /* Bard error */
#define SPD_EEPROM_ADDRESS5 0x55
#define SPD_EEPROM_ADDRESS6 0x56 /* dummy address */
#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1
@@ -57,16 +59,6 @@ unsigned long get_board_ddr_clk(void);
CSPR_PORT_SIZE_16 | \
CSPR_MSEL_NOR | \
CSPR_V)
-#define CONFIG_SYS_NOR1_CSPR \
- (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS) | \
- CSPR_PORT_SIZE_16 | \
- CSPR_MSEL_NOR | \
- CSPR_V)
-#define CONFIG_SYS_NOR1_CSPR_EARLY \
- (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY) | \
- CSPR_PORT_SIZE_16 | \
- CSPR_MSEL_NOR | \
- CSPR_V)
#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(12)
#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
FTIM0_NOR_TEADC(0x5) | \
@@ -88,7 +80,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_FLASH_QUIET_TEST
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
@@ -114,24 +106,24 @@ unsigned long get_board_ddr_clk(void);
| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
| CSOR_NAND_RAL_3 /* RAL = 2Byes */ \
- | CSOR_NAND_PGS_2K /* Page Size = 2K */ \
- | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
- | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
+ | CSOR_NAND_PGS_4K /* Page Size = 2K */ \
+ | CSOR_NAND_SPRZ_224 /* Spare size = 64 */ \
+ | CSOR_NAND_PB(128)) /*Pages Per Block = 64*/
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* ONFI NAND Flash mode0 Timing Params */
-#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \
- FTIM0_NAND_TWP(0x18) | \
- FTIM0_NAND_TWCHT(0x07) | \
- FTIM0_NAND_TWH(0x0a))
-#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
- FTIM1_NAND_TWBE(0x39) | \
- FTIM1_NAND_TRR(0x0e) | \
- FTIM1_NAND_TRP(0x18))
-#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
- FTIM2_NAND_TREH(0x0a) | \
- FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x0e) | \
+ FTIM0_NAND_TWP(0x30) | \
+ FTIM0_NAND_TWCHT(0x0e) | \
+ FTIM0_NAND_TWH(0x14))
+#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x64) | \
+ FTIM1_NAND_TWBE(0xab) | \
+ FTIM1_NAND_TRR(0x1c) | \
+ FTIM1_NAND_TRP(0x30))
+#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x1e) | \
+ FTIM2_NAND_TREH(0x14) | \
+ FTIM2_NAND_TWHRE(0x3c))
#define CONFIG_SYS_NAND_FTIM3 0x0
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
@@ -139,7 +131,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CONFIG_CMD_NAND
-#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024)
#define CONFIG_FSL_QIXIS /* use common QIXIS code */
#define QIXIS_LBMAP_SWITCH 0x06
@@ -148,6 +140,7 @@ unsigned long get_board_ddr_clk(void);
#define QIXIS_LBMAP_DFLTBANK 0x00
#define QIXIS_LBMAP_ALTBANK 0x04
#define QIXIS_RST_CTL_RESET 0x31
+#define QIXIS_RST_CTL_RESET_EN 0x30
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
@@ -185,16 +178,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
-#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT
-#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR_EARLY
-#define CONFIG_SYS_CSPR1_FINAL CONFIG_SYS_NOR1_CSPR
-#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK_EARLY
-#define CONFIG_SYS_AMASK1_FINAL CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT
#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR
#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK
@@ -280,4 +263,4 @@ unsigned long get_board_ddr_clk(void);
"kernel_load=0xa0000000\0" \
"kernel_size=0x1000000\0"
-#endif /* __LS2_QDS_H */
+#endif /* __LS2_RDB_H */
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
