LS2085A uses mxc I2C driver and has four I2C buses.
Signed-off-by: York Sun <[email protected]>
CC: Heiko Schocher <[email protected]>
---
drivers/i2c/mxc_i2c.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index fc5ee35..02a173e 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -114,6 +114,9 @@ static u16 i2c_clk_div[50][2] = {
#ifndef CONFIG_SYS_MXC_I2C3_SPEED
#define CONFIG_SYS_MXC_I2C3_SPEED 100000
#endif
+#ifndef CONFIG_SYS_MXC_I2C4_SPEED
+#define CONFIG_SYS_MXC_I2C4_SPEED 100000
+#endif
#ifndef CONFIG_SYS_MXC_I2C1_SLAVE
#define CONFIG_SYS_MXC_I2C1_SLAVE 0
@@ -124,6 +127,9 @@ static u16 i2c_clk_div[50][2] = {
#ifndef CONFIG_SYS_MXC_I2C3_SLAVE
#define CONFIG_SYS_MXC_I2C3_SLAVE 0
#endif
+#ifndef CONFIG_SYS_MXC_I2C4_SLAVE
+#define CONFIG_SYS_MXC_I2C4_SLAVE 0
+#endif
/*
@@ -545,10 +551,18 @@ U_BOOT_I2C_ADAP_COMPLETE(mxc1, mxc_i2c_init,
mxc_i2c_probe,
CONFIG_SYS_MXC_I2C2_SLAVE, 1)
#if defined(CONFIG_MX31) || defined(CONFIG_MX35) ||\
defined(CONFIG_MX51) || defined(CONFIG_MX53) ||\
- defined(CONFIG_MX6) || defined(CONFIG_LS102XA)
+ defined(CONFIG_MX6) || defined(CONFIG_LS102XA) ||\
+ defined(CONFIG_LS2085A)
U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe,
mxc_i2c_read, mxc_i2c_write,
mxc_i2c_set_bus_speed,
CONFIG_SYS_MXC_I2C3_SPEED,
CONFIG_SYS_MXC_I2C3_SLAVE, 2)
#endif
+#ifdef CONFIG_LS2085A
+U_BOOT_I2C_ADAP_COMPLETE(mxc3, mxc_i2c_init, mxc_i2c_probe,
+ mxc_i2c_read, mxc_i2c_write,
+ mxc_i2c_set_bus_speed,
+ CONFIG_SYS_MXC_I2C4_SPEED,
+ CONFIG_SYS_MXC_I2C4_SLAVE, 3)
+#endif
--
1.7.9.5
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
