Hello Otavio, Thanks a lot for your answer.
It is now working by using the mx28evk config for uboot and specifying u-boot.sb as U-boot binary format in buildroot. Best regards Adrien On Mon, Mar 16, 2015 at 5:35 PM, Otavio Salvador <ota...@ossystems.com.br> wrote: > On Mon, Mar 16, 2015 at 12:51 PM, Adrien Decostre <ad.decos...@gmail.com> > wrote: > > Thanks a lot for your quick answer. > > If I correctly understand the board/freescale/mx28evk/README file, only > > boot up from SD card or flash is supported. It is not possible to boot > > uboot via USB (and by example the sbloader tool)? > > It is, for sure. > > http://www.denx-cs.de/doku/?q=m28evkusbdownloader > > -- > Otavio Salvador O.S. Systems > http://www.ossystems.com.br http://code.ossystems.com.br > Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot