Hello Nathan,

On 03/10/2015 12:30 PM, Nathan wrote:
I hope my last message didn't get lost during that outage last month.

In the mean time, I had to finagle the HardKernel code to work with
GCC 5.0 which ended up being only 1 line change which I may end up
encountering in mainline if I ever get far enough.
After transferring the "CONFIG_MMC_TRACE" to the HardKernel mmc.c, I
have a comparable output for the U2 with the "Samsung" mainline.

So the output comparison can be made more readable, I created a Google
Drive Sheet, lining up the output when there were repeats,
highlighting the differing output sections and changing the text color
for the different values:
https://docs.google.com/spreadsheets/d/1Gu10bG8wGJClorJjKoIMiAt4HR0nS22ugrL8-F5_Nbg/edit?usp=sharing


Now, I don't have too much time for this, but the only one you need is the documentation and a time to analyze the responds for commands.

Please check this site:
https://www.sdcard.org/downloads/pls/simplified_specs/index.html
you can also check some example spec from Jedec:
http://www.jedec.org/standards-documents/results/jesd84-a441

You will solve this problem with this.

By the way, did you tried another SD-Card?

Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marc...@samsung.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to