Let's try this:
Reported-by: Stephen Warren <swar...@nvidia.com>
On 9 March 2015 at 19:12, Simon Glass <s...@chromium.org> wrote:
> Requesting a GPIO without a name is not supposed anymore. This causes the
> request to fail. Add a name so that the serial console works on seaboard.
>
> Signed-off-by: Simon Glass <s...@chromium.org>
> ---
>
> board/nvidia/seaboard/seaboard.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/nvidia/seaboard/seaboard.c
> b/board/nvidia/seaboard/seaboard.c
> index 25480e4..2d07001 100644
> --- a/board/nvidia/seaboard/seaboard.c
> +++ b/board/nvidia/seaboard/seaboard.c
> @@ -20,7 +20,7 @@
> void gpio_early_init_uart(void)
> {
> /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
> - gpio_request(GPIO_PI3, NULL);
> + gpio_request(GPIO_PI3, "uart_en");
> gpio_direction_output(GPIO_PI3, 0);
> }
> #endif
> --
> 2.2.0.rc0.207.ga3a616c
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
