On Tue, Mar 03, 2015 at 08:15:56AM -0600, Rob Herring wrote: > On Tue, Mar 3, 2015 at 5:10 AM, Dileep Katta <dileep.ka...@linaro.org> wrote: > > Signed-off-by: Angela Stegmaier <angelaba...@ti.com> > > Signed-off-by: Dileep Katta <dileep.ka...@linaro.org>
You need a full commit message as I don't really understand what this is
supposed to be doing or why it's needed.
> > ---
> > board/ti/dra7xx/Makefile | 1 +
> > board/ti/dra7xx/fastboot.c | 45
> > ++++++++++++++++++++++++++++++++++++
> > common/cmd_bootm.c | 5 ++++
> > drivers/usb/gadget/f_fastboot.c | 5 ++++
> > include/configs/dra7xx_evm_android.h | 14 +++++++++++
> > 5 files changed, 70 insertions(+)
> > create mode 100644 board/ti/dra7xx/fastboot.c
> >
> > diff --git a/board/ti/dra7xx/Makefile b/board/ti/dra7xx/Makefile
> > index 434e8d1..ae730ae 100644
> > --- a/board/ti/dra7xx/Makefile
> > +++ b/board/ti/dra7xx/Makefile
> > @@ -6,3 +6,4 @@
> > #
> >
> > obj-y := evm.o
> > +obj-$(CONFIG_CMD_FASTBOOT) += fastboot.o
> > diff --git a/board/ti/dra7xx/fastboot.c b/board/ti/dra7xx/fastboot.c
> > new file mode 100644
> > index 0000000..e05010d
> > --- /dev/null
> > +++ b/board/ti/dra7xx/fastboot.c
> > @@ -0,0 +1,45 @@
> > +/*
> > + * (C) Copyright 2013
> > + * Texas Instruments Incorporated, <www.ti.com>
> > + *
> > + * Lokesh Vutla <lokeshvu...@ti.com>
> > + *
> > + * Based on previous work by:
> > + * Aneesh V <ane...@ti.com>
> > + * Steve Sakoman <st...@sakoman.com>
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
> > + */
> > +#include <common.h>
> > +#include <asm/io.h>
> > +#include <asm-generic/gpio.h>
> > +#include <config.h>
> > +
> > +
> > +int fb_set_reboot_flag(void)
> > +{
> > + /* clear all reset events */
> > + __raw_writel(DRA7XX_PRM_RSTST_CLR, PRM_RSTST);
> > + strncpy((char *)DRA7XX_PUBLIC_SAR_RAM_1_FREE, "bootloader",
> > + DRA7XX_REBOOT_REASON_SIZE - 1);
> > + *(((char *)DRA7XX_PUBLIC_SAR_RAM_1_FREE) +
> > + DRA7XX_REBOOT_REASON_SIZE - 1) = '\0';
> > + /* trigger warm reset */
> > + __raw_writel(DRA7XX_PRM_RSTCTRL_RESET_WARM_BIT, DRA7XX_PRM_RSTCTRL);
>
> Does this reset immediately? If so, then you will fail to send a
> response to the client.
>
> > +
> > + return 0;
> > +}
> > +
> > +int fb_check_reboot_flag(void)
> > +{
> > + /* Check if we are coming from a warm reset */
> > + if (__raw_readl(DRA7XX_PRM_RSTST) & DRA7XX_PRM_RSTST_RESET_WARM_BIT)
> > + if (!strncmp((const char *)DRA7XX_PUBLIC_SAR_RAM_1_FREE,
> > + "bootloader", DRA7XX_REBOOT_REASON_SIZE)) {
> > + strncpy((char *)DRA7XX_PUBLIC_SAR_RAM_1_FREE, "",
> > + DRA7XX_REBOOT_REASON_SIZE);
> > + return 0;
> > + }
> > +
> > + return 1;
> > +}
> > diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
> > index 48199bf..00791be 100644
> > --- a/common/cmd_bootm.c
> > +++ b/common/cmd_bootm.c
> > @@ -729,6 +729,11 @@ int do_booti(cmd_tbl_t *cmdtp, int flag, int argc,
> > char * const argv[])
> > {
> > int ret;
> >
> > +#if defined(CONFIG_CMD_FASTBOOT)
> > + if (!fb_check_reboot_flag())
> > + do_fastboot(cmdtp, flag, argc, argv);
> > +#endif
>
> Part of the booti command? First, booti is for arm64 Image files. How
> does this work for you?
>
> More importantly, this should not be tied into any bootX command. It
> should probably be done in a boot script. If the flag is set, the
> board code can set some environment variable. Then the boot script can
> run the fastboot command if the env var is set.
>
> > +
> > /* Consume 'booti' */
> > argc--; argv++;
> >
> > diff --git a/drivers/usb/gadget/f_fastboot.c
> > b/drivers/usb/gadget/f_fastboot.c
> > index 206b6d1..a450357 100644
> > --- a/drivers/usb/gadget/f_fastboot.c
> > +++ b/drivers/usb/gadget/f_fastboot.c
> > @@ -332,6 +332,11 @@ int __weak fb_set_reboot_flag(void)
> > return -ENOSYS;
> > }
> >
> > +int __weak fb_check_reboot_flag(void)
> > +{
> > + return -ENOSYS;
> > +}
> > +
> > static void cb_reboot(struct usb_ep *ep, struct usb_request *req)
> > {
> > char *cmd = req->buf;
> > diff --git a/include/configs/dra7xx_evm_android.h
> > b/include/configs/dra7xx_evm_android.h
> > index 68e7eec..2038e00 100644
> > --- a/include/configs/dra7xx_evm_android.h
> > +++ b/include/configs/dra7xx_evm_android.h
> > @@ -310,4 +310,18 @@
> > #endif
> > #endif /* NOR support */
> >
> > +#define DRA7XX_PUBLIC_SAR_RAM_1_FREE (0x4AE26000 + 0xFE0)
> > +#define DRA7XX_PRM_RSTCTRL_RESET_WARM_BIT (1<<0)
> > +#define DRA7XX_PRM_RSTST_RESET_WARM_BIT (1<<1)
> > +#define DRA7XX_PRM_RSTST 0x4AE07D04
> > +#define DRA7XX_PRM_RSTCTRL 0x4AE07D00
> > +#define DRA7XX_PRM_RSTST_CLR 0xfff
> > +#define DRA7XX_REBOOT_REASON_SIZE 0xf
These defines, if really needed, need to end up somewhere under
arch/arm/include/asm/arch-omap5/ and the code using them somewhere under
arch/arm/cpu/armv7/omap-common/
> > +#define CONFIG_BOARD_MACH_TYPE 4070
>
> You shouldn't need this anymore, right?
>
> > +#define MEMORY_BASE 0x80000000
> > +#define CONFIG_ADDR_ATAGS (MEMORY_BASE + 0x100)
>
> Or this?
>
> > +#define CONFIG_ADDR_DOWNLOAD (MEMORY_BASE + 0x02000000)
> > +#define DEVICE_TREE 0x82f80000
>
> Use fdt_addr_r env var instead?
Yeah, this doesn't look right, nor genericially done for something I
imagine "everyone" doing fastboot would want to get at.
>
> Rob
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
