Add support to configure PWM_OUT(PWM output) GPIO and
BL_EN(backlight enable) GPIO, if provided in FIMD DT node.
Signed-off-by: Ajay Kumar <ajaykumar...@samsung.com>
Reviewed-by: Simon Glass <s...@chromium.org>
Tested-by: Simon Glass <s...@chromium.org>
---
doc/device-tree-bindings/video/exynos-fb.txt | 2 ++
drivers/video/exynos_fb.c | 21 +++++++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/doc/device-tree-bindings/video/exynos-fb.txt
b/doc/device-tree-bindings/video/exynos-fb.txt
index dc4e44f..b022f61 100644
--- a/doc/device-tree-bindings/video/exynos-fb.txt
+++ b/doc/device-tree-bindings/video/exynos-fb.txt
@@ -61,6 +61,8 @@ Board(panel specific):
disabled with compatible string
"samsung,sysmmu-v3.3", with a "reg" property
holding the register address of FIMD sysmmu.
+ samsung,pwm-out-gpio: PWM output GPIO.
+ samsung,bl-en-gpio: backlight enable GPIO.
Example:
SOC specific part:
diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c
index c5d7330..8f3b826 100644
--- a/drivers/video/exynos_fb.c
+++ b/drivers/video/exynos_fb.c
@@ -19,6 +19,7 @@
#include <asm/arch/mipi_dsim.h>
#include <asm/arch/dp_info.h>
#include <asm/arch/system.h>
+#include <asm/gpio.h>
#include <asm-generic/errno.h>
#include "exynos_fb.h"
@@ -102,6 +103,10 @@ __weak int exynos_lcd_misc_init(vidinfo_t *vid)
static void lcd_panel_on(vidinfo_t *vid)
{
+ struct gpio_desc pwm_out_gpio;
+ struct gpio_desc bl_en_gpio;
+ unsigned int node;
+
udelay(vid->init_delay);
exynos_backlight_reset();
@@ -121,6 +126,22 @@ static void lcd_panel_on(vidinfo_t *vid)
exynos_backlight_on(1);
+#ifdef CONFIG_OF_CONTROL
+ node = fdtdec_next_compatible(gd->fdt_blob, 0,
+ COMPAT_SAMSUNG_EXYNOS_FIMD);
+ if (node <= 0) {
+ debug("FIMD: Can't get device node for FIMD\n");
+ return;
+ }
+ gpio_request_by_name_nodev(gd->fdt_blob, node, "samsung,pwm-out-gpio",
+ 0, &pwm_out_gpio,
+ GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
+
+ gpio_request_by_name_nodev(gd->fdt_blob, node, "samsung,bl-en-gpio", 0,
+ &bl_en_gpio,
+ GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
+
+#endif
exynos_cfg_ldo();
exynos_enable_ldo(1);
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
