Hi,
On 26-02-15 21:01, Siarhei Siamashka wrote:
On Thu, 26 Feb 2015 12:08:15 +0100
Gábor Nyers <gny...@opensuse.org> wrote:
The Jesurun Q5 has a black plastic casing with the approximate dimensions of
100mm x 100mm x 24mm with rounded edges. In terms of hardware it features an
Allwinner A10 SoC with 1GB RAM and 8GB of NAND flash. The storage capacity can
be extended up to 32GB with a MicroSD card. The external connectors are: 2x
USB-A female supporting USB2.0, 3.5mm female jack for audio, HDMI female,
SPDIF, RJ45 LAN and Power. In addition the device has 1x red LED (hard wired to
power) and an programmable green led. On the board there is also an unpopulated
IR receiver and the UART. The devices is equipped with an AXP209 PMU.
For more details see: http://linux-sunxi.org/Jesurun_Q5
Signed-off-by: Gábor Nyers <gny...@opensuse.org>
---
configs/jesurun_q5_defconfig | 9 +++++++++
1 file changed, 9 insertions(+)
create mode 100644 configs/jesurun_q5_defconfig
diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig
new file mode 100644
index 0000000..7ef35f2
--- /dev/null
+++ b/configs/jesurun_q5_defconfig
@@ -0,0 +1,9 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,MACPWR=SUNXI_GPH(19)"
+CONFIG_FDTFILE="sun4i-a10-jesurun-q5.dtb"
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN4I=y
++S:CONFIG_DRAM_CLK=312
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=0
This patch is missing the "sunxi:" prefix in the summary line and
also an entry in the "board/sunxi/MAINTAINERS" file.
Additionally, it may be a good idea to have a reference to
the http://linux-sunxi.org/Jesurun_Q5 page as a comment in
the defconfig file. And eventually do the same for all
sunxi defconfigs. Right now the u-boot "configs" directory
is a growing pile of unsorted stuff. And it may be difficult
for a user to decide, which defconfig would be the right one
for his device (considering that some devices are not perfectly
labelled with exactly the same name as the defconfig file).
All good points, all fixed in u-boot-sunxi/next (with a forced
push).
Regards,
Hans
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
