On Wednesday, February 25, 2015 at 05:51:38 AM, Ramneek Mehresh wrote: > Hi Marek, > > Thanks for the reply. > > Yes, we are seeing USB 3.0 pen drives from different vendors taking > different times to give connect-change on latest u-boot. Out of all, HP > pen drive is taking most of the time.
Is this even a bug ? Are you capable of debugging this ? Maybe it's just a crappy drive . > Would it be possible for you to send the list of devices that you normally > test? We just want to cross-verify if any of the same device tested on out > platform is not giving any issue. I don't think there's any point in my enumerating random flashes I have here. Instead, please report possible misbehavior in case you stumble upon one. At best, with a patch attached even. And please do not top-post . > Thanks and Regards, > Ramneek > > > -----Original Message----- > > From: Marek Vasut [mailto:ma...@denx.de] > > Sent: Tuesday, February 24, 2015 11:09 PM > > To: Mehresh Ramneek-B31383 > > Cc: u-boot@lists.denx.de > > Subject: Re: Regarding USB device testing in U-boot release > > > > On Tuesday, February 24, 2015 at 06:59:40 AM, Ramneek Mehresh wrote: > > > Hi Marex, > > > > Hi, > > > > please keep the list on CC (fixed). > > > > > Could you please confirm if some USB devices are tested before each > > > U-boot release by Denx? If yes, then I would request you to please > > > share the list of these devices? > > > > I do my testing with a couple of USB 2.0/USB 3.0 sticks on Altera SoCFPGA > > Cyclone V and newly also Arria V. I also do some testing on iMX28, 53 and > > 6 platforms from Freescale. The rest of the testing is up to the > > community. In my experience, in case there's a regression in the USB > > stack, someone starts complaining about it sooner rather than later. > > > > Do you have any particular device which is broken ? > > > > Best regards, > > Marek Vasut Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
