> Got it... thanks to > "http://www.mail-archive.com/u-boot-us...@lists.sourceforge.net/msg05111.html";. > I added the following to the very end of > "u-boot-2009.03/board/ep88x/ep88x.c": > > #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) > void ft_board_setup(void *blob, bd_t *bd) > { > ft_cpu_setup(blob, bd); > } > #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ > Forgot to mention that this function got u-boot to update my device tree properly, I had to make only minimal changes to my device tree "linux-2.6-denx/arch/powerpc/boot/dts/ep88xc.dts", correcting some addresses to match the IMMR set in my "u-boot-2009.03/include/configs/EP88x.h".
I didn't even need to use /chosen/linux,stdout-path in my DTS, just used "console=ttyCPM0,9600n8" in my boot args. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
