User Mass Storage is very useful for flashing the on-board eMMC. Add support for it.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> --- Changes since v1: - Remove EXT2/EXT4 and BOUNCE_BUFFER support include/configs/mx6sabre_common.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index f0f721e..337b865 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -279,4 +279,18 @@ #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP +#define CONFIG_CI_UDC +#define CONFIG_USBD_HS +#define CONFIG_USB_GADGET_DUALSPEED + +#define CONFIG_USB_GADGET +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_VBUS_DRAW 2 + +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 +#define CONFIG_G_DNL_MANUFACTURER "FSL" + #endif /* __MX6QSABRE_COMMON_CONFIG_H */ -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot