Signed-off-by: Valeriy Glushkov <g...@lstec.com>
---
include/configs/MPC8349ITX.h | 31 +++++++++++++++++++++++++++++--
1 files changed, 29 insertions(+), 2 deletions(-)
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index f2e574b..0ff09a0 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -79,6 +79,7 @@
#define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the
board */
#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */
#define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */
+#define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */
#endif
#define CONFIG_PCI
@@ -155,6 +156,25 @@
#endif
+#ifdef CONFIG_SYS_USB_HOST
+/*
+ * Support USB
+ */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+
+/* Current USB implementation supports the only USB controller,
+ * so we have to choose between the MPH or the DR ones */
+#if 1
+#define CONFIG_HAS_FSL_MPH_USB
+#else
+#define CONFIG_HAS_FSL_DR_USB
+#endif
+
+#endif
+
/*
* DDR Setup
*/
@@ -463,9 +483,11 @@ boards, we say we have two, but don't display a message if
we find only one. */
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_SDRAM
-#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114)
+#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \
+ || defined(CONFIG_USB_STORAGE)
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_FAT
+ #define CONFIG_SUPPORT_VFAT
#endif
#ifdef CONFIG_COMPACT_FLASH
@@ -474,6 +496,9 @@ boards, we say we have two, but don't display a message if
we find only one. */
#ifdef CONFIG_SATA_SIL3114
#define CONFIG_CMD_SATA
+#endif
+
+#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE)
#define CONFIG_CMD_EXT2
#endif
@@ -567,12 +592,14 @@ boards, we say we have two, but don't display a message
if we find only one. */
#define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority
(0-3) */
#define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */
#define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode
(0-3) */
+#define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */
+#define CONFIG_SYS_SCCR_USBDRCM 0 /* USB DR controller's clock */
/*
* System IO Config
*/
#define CONFIG_SYS_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1
*/
-#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1)
+#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) /* USB DR as device +
USB MPH as host */
#define CONFIG_SYS_HID0_INIT 0x000000000
#define CONFIG_SYS_HID0_FINAL CONFIG_SYS_HID0_INIT
--
1.5.2.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
