From: Roy Zang <tie-fei.z...@freescale.com>
Add pci E1000 Ethernet support for P2020 board.
Signed-off-by: Roy Zang <tie-fei.z...@freescale.com>
---
board/freescale/p2020ds/p2020ds.c | 3 ++-
include/configs/P2020DS.h | 1 +
2 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/board/freescale/p2020ds/p2020ds.c
b/board/freescale/p2020ds/p2020ds.c
index 6b72d61..293e5a4 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -36,6 +36,7 @@
#include <tsec.h>
#include <asm/fsl_law.h>
#include <asm/mp.h>
+#include <netdev.h>
#include "../common/pixis.h"
#include "../common/sgmii_riser.h"
@@ -594,7 +595,7 @@ int board_eth_init(bd_t *bis)
tsec_eth_init(bis, tsec_info, num);
- return 0;
+ return pci_eth_init(bis);
}
#endif
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index a39ff26..7fd2f5c 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -46,6 +46,7 @@
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
+#define CONFIG_E1000 1 /* Defind e1000 pci Ethernet card*/
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
--
1.5.6.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
