This is necessary to use the xHCI cores for PH1-Pro4.
Signed-off-by: Masahiro Yamada <yamad...@jp.panasonic.com>
---
Changes in v2: None
arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c
b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c
index 4e3d476..3335fb3 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c
@@ -41,6 +41,13 @@ void pin_init(void)
sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */
#endif
+#ifdef CONFIG_USB_XHCI_UNIPHIER
+ sg_set_pinsel(180, 0); /* USB0VBUS -> USB0VBUS */
+ sg_set_pinsel(181, 0); /* USB0OD -> USB0OD */
+ sg_set_pinsel(182, 0); /* USB1VBUS -> USB1VBUS */
+ sg_set_pinsel(183, 0); /* USB1OD -> USB1OD */
+#endif
+
#ifdef CONFIG_USB_EHCI_UNIPHIER
sg_set_pinsel(184, 0); /* USB2VBUS -> USB2VBUS */
sg_set_pinsel(185, 0); /* USB2OD -> USB2OD */
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
