Hi Alexey, On 18 February 2015 at 06:44, Alexey Brodkin <alexey.brod...@synopsys.com> wrote: > Hi Simon, > > On Thu, 2015-02-05 at 21:41 -0700, Simon Glass wrote: >> +config SYS_MALLOC_F >> + bool "Enable malloc() pool before relocation" >> + default 0x400 > > I'm wondering if default value here should be of type "bool" but not a > hex value? > > Probably this is just a copy paste from the following SYS_MALLOC_F_LEN? >
Thanks. I found another problem also but may have a solution now so will see a few patches, >> + help >> + Before relocation memory is very limited on many platforms. Still, >> + we can provide a small malloc() pool if needed. Driver model in >> + particular needs this to operate, so that it can allocate the >> + initial serial device and any others that are needed. >> + >> +config SYS_MALLOC_F_LEN >> + hex "Size of malloc() pool before relocation" >> + depends on SYS_MALLOC_F >> + default 0x400 >> + help >> + Before relocation memory is very limited on many platforms. Still, >> + we can provide a small malloc() pool if needed. Driver model in >> + particular needs this to operate, so that it can allocate the >> + initial serial device and any others that are needed. > > -Alexey Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
